Post Reply 
Replacement for HP-97 card reader cable
11-06-2014, 07:37 AM
Post: #1
Replacement for HP-97 card reader cable
I would like to share a tip for an inexpensive replacement flat cable for the HP-97 card reader assembly. The replacement has almost exact length and matching connector spacing, only tree conductors to many - easily cut away with a pair of scissors. I have tested, and it has a very good fit.
See:

http://www.ebay.com/itm/KFC-AWM-2896-80C...1c39e62bc0
Find all posts by this user
Quote this message in a reply
11-06-2014, 07:37 PM
Post: #2
RE: Replacement for HP-97 card reader cable
I don't need any at the moment, but I think I might buy some just because! I have had lots of trouble with these before, both in a 97 and an 85 computer. Thanks!
Find all posts by this user
Quote this message in a reply
11-07-2014, 08:11 AM
Post: #3
RE: Replacement for HP-97 card reader cable
Yes, it was a relief to find these since I had a cable where the conductors were coming lose from the carrier material. 6 USD for three Cables (incl. shipping) is quite a good price, I think. My cables were delivered a couple of weeks after order.
Find all posts by this user
Quote this message in a reply
11-11-2014, 07:14 PM
Post: #4
RE: Replacement for HP-97 card reader cable
Oh, nice find! I ordered one (apparently there are three cables to the set). I've had trouble with the original cable delaminating.
Find all posts by this user
Quote this message in a reply
11-12-2014, 07:31 AM
Post: #5
RE: Replacement for HP-97 card reader cable
I hope you will be as satisified as I am - also nice to have a couple of extra cables.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)