Post Reply 
DM15L Review
10-19-2024, 06:01 PM
Post: #21
RE: DM15L Review
(10-19-2024 03:23 PM)AnnoyedOne Wrote:  As for the DM15L I have no experience. From what I've read it has a different "feel". The 2-line display is of no interest to me. Since the CE was a limited production run and stock is now low I'd likely go with the DM15L too.

I've always liked the look of those voyagers and two lines will make it much easier to get into RPN. The DM-42L looked really nice.
Find all posts by this user
Quote this message in a reply
10-19-2024, 06:14 PM (This post was last modified: 10-19-2024 06:15 PM by AnnoyedOne.)
Post: #22
RE: DM15L Review
(10-19-2024 06:01 PM)dm319 Wrote:  ...two lines will make it much easier to get into RPN.

I never had any trouble with that. Perhaps because I'd been writing assembler programs for years beforehand so the whole "stack concept" wasn't new to me. Although four levels was a bit limiting Smile

A1

HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251)

Find all posts by this user
Quote this message in a reply
10-19-2024, 07:48 PM
Post: #23
RE: DM15L Review
(10-19-2024 03:23 PM)AnnoyedOne Wrote:  As for the DM15L I have no experience. From what I've read it has a different "feel". The 2-line display is of no interest to me. Since the CE was a limited production run and stock is now low I'd likely go with the DM15L too.

At least to me, the chief value of the 2-line display is not also seeing the Y-register, but rather in PGM mode, seeing the opcode in addition to the key-codes makes it far easier/quicker to grasp the program statements, when editing, and especially when using SST. I agree that if you have experience using RPN, it might occasionally be useful to see Y, but this is a secondary benefit.

Seeing the Y register and some other setup mode controls using the 2-line display are nice, and add convenience, but these are leveraged side-effects of having a 2-line LCD available.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
10-20-2024, 03:18 PM
Post: #24
RE: DM15L Review
(10-19-2024 07:48 PM)rprosperi Wrote:  ...but rather in PGM mode, seeing the opcode in addition to the key-codes makes it far easier/quicker to grasp the program statements, when editing, and especially when using SST.

Good point Bob! I might have to reconsider my "cheap bastard" ways Smile

As an aside does anyone know how to get rid of that annoying little guy on your shoulder saying "Buy one. You know that you want to"?

A1

HP-15C (2234A02xxx), HP-16C (2403A02xxx), HP-15C CE (9CJ323-03xxx), HP-20S (2844A16xxx), HP-12C+ (9CJ251)

Find all posts by this user
Quote this message in a reply
10-20-2024, 03:41 PM
Post: #25
RE: DM15L Review
(10-20-2024 03:18 PM)AnnoyedOne Wrote:  As an aside does anyone know how to get rid of that annoying little guy on your shoulder saying "Buy one. You know that you want to"?

A1

He disappears as soon as you hit the buy button ;-)

Esben
15C CE, 28s, 35s, 49G+, 50G, Prime G2 HW D, SwissMicros DM32, DM42, DM42n, WP43 Pilot
Elektronika MK-52 & MK-61
Find all posts by this user
Quote this message in a reply
10-20-2024, 04:56 PM
Post: #26
RE: DM15L Review
(10-20-2024 03:41 PM)DA74254 Wrote:  He disappears as soon as you hit the buy button ;-)
Not in my experience. He just finds a new obsession.
Find all posts by this user
Quote this message in a reply
10-20-2024, 05:32 PM
Post: #27
RE: DM15L Review
(10-20-2024 03:41 PM)DA74254 Wrote:  He disappears as soon as you hit the buy button ;-)

Not in my experience. He then immediately starts saying "you should have got model X, instead".

Cambridge, UK
41CL/DM41X 12/15C/16C DM15/16 17B/II/II+ 28S 42S/DM42 32SII 48GX 50g 35s WP34S PrimeG2 WP43S/pilot/C47
Casio, Rockwell 18R
Find all posts by this user
Quote this message in a reply
10-20-2024, 05:39 PM
Post: #28
RE: DM15L Review
(10-20-2024 03:18 PM)AnnoyedOne Wrote:  As an aside does anyone know how to get rid of that annoying little guy on your shoulder saying "Buy one. You know that you want to"?
Annoying? A wise friend, I’d say!
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)