+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: Cat of a port content on HP-75C/D (/thread-10070.html)
Cat of a port content on HP-75C/D - cgh - 02-01-2018 10:31 PM
Hello,
I am looking for a command able to list (catalog) the content of a port on the HP-75C/D. Something like the CAT :PORT(n) for the HP-71B.
Thanks,
Christophe
RE: Cat of a port content on HP-75C/D - rprosperi - 02-01-2018 11:04 PM
(02-01-2018 10:31 PM)cgh Wrote: Hello,
I am looking for a command able to list (catalog) the content of a port on the HP-75C/D. Something like the CAT :PORT(n) for the HP-71B.
Thanks,
Christophe
There is no built-in command in the 75 ROM for doing this. If you are looking for information on LEX files in a ROM module, the HELP LEX file, described about 2/3 of the way down this page (post by Howard Owen) will display a list of the available commands (and their arguments) in installed LEX files.
The HELP LEX file is available in several of the LIF archives within the OLDP.
RE: Cat of a port content on HP-75C/D - J-F Garnier - 02-02-2018 07:43 AM
You can also have a look at this previous discussion: HP 75 Cat?.
J-F
RE: Cat of a port content on HP-75C/D - cgh - 02-02-2018 08:35 AM
Thank you for your replies. I will have a look this week-end
