HP Forums
HP41 Emulator card for HP48 series - Printable Version

+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: HP41 Emulator card for HP48 series (/thread-11770.html)



HP41 Emulator card for HP48 series - edryer - 11-08-2018 06:40 PM

Are these rare? I have been looking for one for awhile with no luck... did see one on eBay about a year ago but was foolish and didn't purchase but it was I believe around $100. Any pointers?

Thanks!


RE: HP41 Emulator card for HP48 series - cgh - 11-08-2018 07:33 PM

Yes. They are rare and something to know: these cards run only in a SX (not the GX).
Also, it seems to be more a "simulator" than a real emulator.
A better alternative could be HP41X.


RE: HP41 Emulator card for HP48 series - edryer - 11-08-2018 07:36 PM

Oh, I suspected it was the SX only, thanks for confirming!

If only the SX had a decent display.... or it was easy to swap with the later Black GX's.


RE: HP41 Emulator card for HP48 series - HP-Collection - 11-08-2018 10:48 PM

Small correction: There is a version for the GX, but only ONE unique card (as I know).....


RE: HP41 Emulator card for HP48 series - Sylvain Cote - 11-09-2018 12:49 AM

Some pointer to the HP 82210A : HP 41CV Emulator Application Card for the HP 48SX


RE: HP41 Emulator card for HP48 series - Raymond Del Tondo - 11-10-2018 11:08 PM

(11-08-2018 07:33 PM)cgh Wrote:  Also, it seems to be more a "simulator" than a real emulator.
As written before, the Zengrange "HP41CV Emulator" Card is a simulator on the UI side, but it incarnates a FOCAL execution engine which is compatible to the real HP-41 and the real HP-42S. IOW the FOCAL bytecode is the same on all three mentionned platforms.


RE: HP41 Emulator card for HP48 series - Raymond Del Tondo - 11-10-2018 11:13 PM

(11-08-2018 10:48 PM)HP-Collection Wrote:  Small correction: There is a version for the GX, but only ONE unique card (as I know).....
Did I mention that there is a new GX version which has a much faster UI and translates even longer FOCAL program texts into FXE bytecode within seconds instead of minutes?


RE: HP41 Emulator card for HP48 series - rprosperi - 11-13-2018 03:24 AM

Thanks for these detailed notes Raymond. Was the GX version marketed under the same model number and how can one tell which version will work on the GX (or is it both SX and GX)?

I have a card that reports "0E" for the response to the VERS41 command in the Ctl41 Library. Seems to be SX only. Copyright on the card is Zengrange, 1990.


RE: HP41 Emulator card for HP48 series - Raymond Del Tondo - 11-13-2018 09:45 AM

The GX version was never marketed through HP, and that GX version I mentionned was not made by Zengrange nor by the original author of the Zengrange code.
The GX version I'm talking about is a single library, has a much faster UI than the Zengrange version, doesn't use absolute addressing, and thus can be stored anywhere in port 0 or 1 .


RE: HP41 Emulator card for HP48 series - Michael Lopez - 11-13-2018 10:26 AM

Hi Raymond,

So how can we obtain the GX version (just asking a leading question)?

Already have the card for the SX version but would be interested in the GX version as an alternative.

Thanks,

Michael


RE: HP41 Emulator card for HP48 series - Giancarlo - 11-13-2018 12:16 PM

Gosh, I am several thousand miles away from home and just cannot verify what my 41 emulator card version is...

Giancarlo


RE: HP41 Emulator card for HP48 series - Massimo Gnerucci - 11-13-2018 12:20 PM

(11-13-2018 12:16 PM)Giancarlo Wrote:  Gosh, I am several thousand miles away from home and just cannot verify what my 41 emulator card version is...

Giancarlo

If it's on a card it is the SX version.


RE: HP41 Emulator card for HP48 series - rprosperi - 11-13-2018 02:11 PM

(11-13-2018 09:45 AM)Raymond Del Tondo Wrote:  The GX version was never marketed through HP, and that GX version I mentionned was not made by Zengrange nor by the original author of the Zengrange code.
The GX version I'm talking about is a single library, has a much faster UI than the Zengrange version, doesn't use absolute addressing, and thus can be stored anywhere in port 0 or 1 .

I agree, I'd like to see this version if it could be shared. The faster UI plus extra GX speed should make it more natural to use.

Did someone hack the original version with GX and UI speedup changes or was this a complete re-write? Either way, seems like quite an extraordinary accomplishment, the author was clearly quite skilled.


RE: HP41 Emulator card for HP48 series - Massimo Gnerucci - 11-13-2018 02:16 PM

(11-13-2018 02:11 PM)rprosperi Wrote:  Did someone hack the original version with GX and UI speedup changes or was this a complete re-write? Either way, seems like quite an extraordinary accomplishment, the author was clearly quite skilled.

I wonder who he is... ;)


RE: HP41 Emulator card for HP48 series - Didier Lachieze - 11-24-2018 09:14 AM

(11-13-2018 03:24 AM)rprosperi Wrote:  I have a card that reports "0E" for the response to the VERS41 command in the Ctl41 Library. Seems to be SX only. Copyright on the card is Zengrange, 1990.

I just received a 48SX with a HP41 Emulator card inside. It was not advertised as such but I spotted the emulator overlay on the keyboard.

The VERS41 reports "0A" for the emulator card, and the 48SX rom version is D (s/n 3019A)

The entire string returned by VERS41 is:
Code:
0A
Copyright 1990
Zengrange Inc.
900928 0133
Design & code:
FCW,IW,RWJ,DRC
Manual:WACM-J,MHJ,TJW
for Terra Pacific 
Help:TWB,CB,SB,DKB, 
JAD,DLE,SRL,VKL,RM, 
RJN,CP,GP,GS,JS,BGS,
BAS,ELV,WCW,RSW,DY,RY
Patience:SHC,HG,PK

900928 0133 seems to be the date and time of the rev 0A release, which is aligned with the manual Edition 1 October 1990.


RE: HP41 Emulator card for HP48 series - J-F Garnier - 11-24-2018 02:20 PM

(11-24-2018 09:14 AM)Didier Lachieze Wrote:  Manual:WACM-J,MHJ,TJW

WACM-J = Wlodek A.C. Mier-Jedrzejowicz


RE: HP41 Emulator card for HP48 series - Jake Schwartz - 11-26-2018 07:36 PM

(11-24-2018 02:20 PM)J-F Garnier Wrote:  
(11-24-2018 09:14 AM)Didier Lachieze Wrote:  Manual:WACM-J,MHJ,TJW

WACM-J = Wlodek A.C. Mier-Jedrzejowicz

I am certain that "FCW" is Frank Wales.

Jake