+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Software Libraries (/forum-10.html)
+--- Forum: HP-41C Software Library (/forum-11.html)
+--- Thread: (41CV) Programs for a Target Position Estimation Procedure (/thread-12393.html)
(41CV) Programs for a Target Position Estimation Procedure - SlideRule - 02-09-2019 04:32 PM
An extract from Programs for a Target Position Estimation Procedure, Naval Post Graduate School, NPS71-83-002, MAR 1983.
ABSTRACT
The report contains program listings and user instructions for an HP-41CV, a Sharp PC-1500 (or TRS-80 PC-2) , a Sharp PC-1211 (or TRS-80 PC-1), a Casio FX-702P and a TI-59. The programs implement a bearings-only position estimation procedure. A development for the procedure is included in the report.
I. Introduction
The programs provide a means of implementing a position estimation procedure that is described in Appendix 1. The procedure is based on the following assumptions:
yes, a multi-model article
BEST!
SlideRule
RE: (41CV) Programs for a Target Position Estimation Procedure - pier4r - 02-09-2019 11:15 PM
The document Appendix 1 is quite nice.
Thanks for sharing!