HP Forums
How to tell if a Prime is version G1 or G2? - Printable Version

+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: HP Prime (/forum-5.html)
+--- Thread: How to tell if a Prime is version G1 or G2? (/thread-12794.html)

Pages: 1 2

How to tell if a Prime is version G1 or G2? - kevin3g - 04-12-2019 04:22 PM

Hello, I have a Prime and was wondering which version I have. Is there a way to check this?

Thanks

RE: How to tell if a Prime is version G1 or G2? - DA74254 - 04-12-2019 04:32 PM

The G2 has embossed the "G2" on the back.
Under "Help" -> Tree -> About all revisions up to and including "C" is G1.
Rev D is G2

RE: How to tell if a Prime is version G1 or G2? - Joe Horn - 04-13-2019 01:13 AM

[Image: Prime-regulatory-block-comparison.jpg]

RE: How to tell if a Prime is version G1 or G2? - Joe Horn - 04-13-2019 01:16 AM

(04-13-2019 01:13 AM)Joe Horn Wrote:  [Image: Prime-regulatory-block-comparison.jpg]

(04-12-2019 04:32 PM)DA74254 Wrote:  Under "Help" -> Tree -> About all revisions up to and including "C" is G1.
Rev D is G2

The HW version is also output by the VERSION(2) command.

RE: How to tell if a Prime is version G1 or G2? - KevinMurphy - 04-13-2019 02:29 AM

What are the advantages of the G2 anyway?

RE: How to tell if a Prime is version G1 or G2? - Zaphod - 04-13-2019 05:05 AM

(04-13-2019 02:29 AM)KevinMurphy Wrote:  What are the advantages of the G2 anyway?

Hardwarewise:

G1 uses a 400 MHz Samsung S3C2416XH-40 (ARM926EJ core, ARMv5 architecture)
G2 uses a 528 MHz NXP i.MX 6ULL MCIMX6Y2 (Cortex A7 core, ARMv7 architecture)

G1 has 32 MB RAM, 256 MB flash
G2 has 256 MB RAM, 512 MB flash

G1 battery: 3.7V/1500mAh/5.55Wh
G2 battery: 3.7V/2000mAh/7.4Wh

RE: How to tell if a Prime is version G1 or G2? - grsbanks - 04-13-2019 07:29 AM

(04-13-2019 05:05 AM)Zaphod Wrote:  
(04-13-2019 02:29 AM)KevinMurphy Wrote:  What are the advantages of the G2 anyway?

Hardwarewise:

G1 uses a 400 MHz Samsung S3C2416XH-40 (ARM926EJ core, ARMv5 architecture)
G2 uses a 528 MHz NXP i.MX 6ULL MCIMX6Y2 (Cortex A7 core, ARMv7 architecture)

G1 has 32 MB RAM, 256 MB flash
G2 has 256 MB RAM, 512 MB flash

G1 battery: 3.7V/1500mAh/5.55Wh
G2 battery: 3.7V/2000mAh/7.4Wh

Softwarewise it runs at about 3x the speed of the G1:
http://techy.horwits.com/2018/12/hp-prime-benchmark.html

RE: How to tell if a Prime is version G1 or G2? - StephenG1CMZ - 04-13-2019 07:34 AM

(04-13-2019 02:29 AM)KevinMurphy Wrote:  What are the advantages of the G2 anyway?

Also, if you buy a G2 you know you will have a more readable keyboard.
If you buy a G1, you don't know which keyboard you will have without further checking.

RE: How to tell if a Prime is version G1 or G2? - KevinMurphy - 04-13-2019 12:00 PM

(04-13-2019 07:34 AM)StephenG1CMZ Wrote:  
(04-13-2019 02:29 AM)KevinMurphy Wrote:  What are the advantages of the G2 anyway?

Also, if you buy a G2 you know you will have a more readable keyboard.
If you buy a G1, you don't know which keyboard you will have without further checking.

What do you mean "you don't know which keyboard you will have"? I have a G1. Are the keyboards made differently?

RE: How to tell if a Prime is version G1 or G2? - Lode - 04-13-2019 12:19 PM

(04-13-2019 12:00 PM)KevinMurphy Wrote:  
(04-13-2019 07:34 AM)StephenG1CMZ Wrote:  Also, if you buy a G2 you know you will have a more readable keyboard.
If you buy a G1, you don't know which keyboard you will have without further checking.

What do you mean "you don't know which keyboard you will have"? I have a G1. Are the keyboards made differently?

The more readable keyboard has a darker blue paint scheme, this post shows the difference:

https://www.hpmuseum.org/forum/thread-6916.html

RE: How to tell if a Prime is version G1 or G2? - grsbanks - 04-13-2019 12:42 PM

(04-13-2019 12:00 PM)KevinMurphy Wrote:  What do you mean "you don't know which keyboard you will have"? I have a G1. Are the keyboards made differently?

There are two hardware declensions of the first generation (G1) Prime. Rev. A and Rev. C (there was no Rev. B that I'm aware of).

All of the Rev. A and some of the early Rev. C units had the wishy-washy, barely visible colour scheme. Later Rev. C and all Rev. D (G2) Primes have the much better contrast markings.

It's doubtful that there are still any Rev. A models on the market. There are still some Rev. C models available, notably in the Americas. If you buy one of those, you won't know what colours you're getting until you unbox the unit. If you buy a G2 (Rev. D) then you're sure to get the better colour scheme.

RE: How to tell if a Prime is version G1 or G2? - ijabbott - 04-13-2019 04:13 PM

(04-13-2019 12:42 PM)grsbanks Wrote:  It's doubtful that there are still any Rev. A models on the market.

Amazon.co.uk still have some listings with the Rev. A model number NW280AA, so maybe! One of the listings offers a selection between "HP Prime" (NW280AA) and "HP Prime -New Model - International Pack" (G8X92AAB1S). There is a separate listing for the HP Prime G2 but about £15 to £20 more than the others (perhaps to try and shift the older models).

RE: How to tell if a Prime is version G1 or G2? - Zaphod - 04-13-2019 06:03 PM

(04-13-2019 12:42 PM)grsbanks Wrote:  It's doubtful that there are still any Rev. A models on the market. There are still some Rev. C models available, notably in the Americas. If you buy one of those, you won't know what colours you're getting until you unbox the unit.

I wouldn’t be too sure at all, I picked up a very very cheap (brand new and boxed) Hp50g six months ago , and it turned out to be old stock that had a free 1GB MP3 player in the blister pack. (I know it was old stock because I bought the very same version several years previous to this recent one!)
The MP3 player is truly ancient compared to modern variants. The 1GB is a dead giveaway to its age.

Some stockists just stock a SKU and pay little attention to which version it is, it might have also changed retail hands several times before you buy it.

RE: How to tell if a Prime is version G1 or G2? - toml_12953 - 04-15-2019 03:16 AM

(04-13-2019 12:00 PM)KevinMurphy Wrote:  
(04-13-2019 07:34 AM)StephenG1CMZ Wrote:  Also, if you buy a G2 you know you will have a more readable keyboard.
If you buy a G1, you don't know which keyboard you will have without further checking.

What do you mean "you don't know which keyboard you will have"? I have a G1. Are the keyboards made differently?

The last G1s produced had the higher-contrast keyboards but many vendors still have unsold earlier models with the lower-contrast keyboards. Unless you are dealing with a knowledgeable vendor, it's a crap shoot as to which keyboard you'll get.

RE: How to tell if a Prime is version G1 or G2? - henriquedoth - 03-16-2020 09:49 PM

(04-13-2019 05:05 AM)Zaphod Wrote:  
(04-13-2019 02:29 AM)KevinMurphy Wrote:  What are the advantages of the G2 anyway?

Hardwarewise:

G1 uses a 400 MHz Samsung S3C2416XH-40 (ARM926EJ core, ARMv5 architecture)
G2 uses a 528 MHz NXP i.MX 6ULL MCIMX6Y2 (Cortex A7 core, ARMv7 architecture)

G1 has 32 MB RAM, 256 MB flash
G2 has 256 MB RAM, 512 MB flash

G1 battery: 3.7V/1500mAh/5.55Wh
G2 battery: 3.7V/2000mAh/7.4Wh

where can you find this specs in a official HP link

RE: How to tell if a Prime is version G1 or G2? - Tim Wessman - 03-17-2020 01:16 AM

(03-16-2020 09:49 PM)henriquedoth Wrote:  where can you find this specs in a official HP link

To this level of detail, nowhere.

Newer data sheets will list more flash and RAM, but from HPs perspective they are basically the same thing. Just one is a bit newer and has slightly tweaked internals.

RE: How to tell if a Prime is version G1 or G2? - toml_12953 - 03-17-2020 02:20 AM

(04-13-2019 07:29 AM)grsbanks Wrote:  Softwarewise it runs at about 3x the speed of the G1:
http://techy.horwits.com/2018/12/hp-prime-benchmark.html

When I try to run that benchmark, it asks for opts and no matter what number I put in there I get an Invalid Input error. I have both the app and the program on my virtual and physical calculators and both do that.

RE: How to tell if a Prime is version G1 or G2? - cyrille de brébisson - 03-17-2020 07:29 AM

Hello

I find that the easiest way to know which version it is is to reboot it. The G1 has an animation with the HP logo, a cartesian plan and the x²+y²=1 equation.

The G2 has only the HP logo.

Cyrille

RE: How to tell if a Prime is version G1 or G2? - henriquedoth - 03-17-2020 11:40 AM

(03-17-2020 07:29 AM)cyrille de brébisson Wrote:  Hello

I find that the easiest way to know which version it is is to reboot it. The G1 has an animation with the HP logo, a cartesian plan and the x²+y²=1 equation.

The G2 has only the HP logo.

Cyrille

Nice to know it. Do you guys know options where can I buy the real G2 one by internet ? Guys HP have just created a messy situation where we can find 4 different models in the market with a tiny difference between them , a perfect scene for bad vendors make money.

RE: How to tell if a Prime is version G1 or G2? - Dougggg - 03-18-2020 03:32 AM

I believe the model you want is 2AP18AA maybe some one with one can comfirm. Looks like amazon and best buy have them