Greetings from Germany - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html) +--- Forum: General Forum (/forum-4.html) +--- Thread: Greetings from Germany (/thread-13333.html) Pages: 1 2 |
RE: Greetings from Germany - Thott - 07-27-2019 02:47 PM (07-27-2019 01:08 PM)Karl-Ludwig Butte Wrote: [.....] Hello Karl, thank you for the tips....as soon as it is necessary I will try it. At the moment the card reader works excellent. And you know: never change a running system :-) Greetings Thomas RE: Greetings from Germany - HP-Collection - 07-27-2019 04:35 PM Auch ich grüsse dich herzlich und heisse dich willkommen. Ich komme aus Basel. Vielleicht trifft man sich im 2020 an nächsten Allschwil Meeting. Matthias http://www.hp-collection.org (ja, meine Sammlung ist noch etwas grösser) RE: Greetings from Germany - AndiGer - 07-27-2019 04:40 PM For the transportation roll if I use silicone tubing I use the thing that is sold as Tygon F-4040-A with id 3.2mm (1/8''), od 6.4mm (1/4''). I.e. the same thing you can find in Katie's old postings. Sometimes I use rubber O-rings. Some card readers don't like the tubing so much ... RE: Greetings from Germany - Thott - 07-27-2019 06:36 PM (07-27-2019 04:35 PM)HP-Collection Wrote: Auch ich grüsse dich herzlich und heisse dich willkommen. Ich komme aus Basel. Vielleicht trifft man sich im 2020 an nächsten Allschwil Meeting. Hallo Matthias, Danke für das Willkommen. I can not believe what I see. What a amazing collection..... How long took it, to collect all this parts? Most of them I see the first time. You can be proud of this extraordinary collection...... Greetings Thomas RE: Greetings from Germany - Thott - 07-27-2019 06:54 PM (07-27-2019 04:40 PM)AndiGer Wrote: For the transportation roll if I use silicone tubing I use the thing that is sold as Tygon F-4040-A with id 3.2mm (1/8''), od 6.4mm (1/4''). I.e. the same thing you can find in Katie's old postings. Hello, thank you for the information. Currently I use two O-rings at the drive shaft and fix it at the shaft with superglue. It works fine up to now. For the adjustment of the drive roll I didn’t follow the service manual, measuring the motor current (see attachment). I listen to the motor sound were it sounds equal and not “stressed”.. Greetings Thomas |