Review: TI-66 - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: Not HP Calculators (/forum-7.html) +--- Forum: Not remotely HP Calculators (/forum-9.html) +--- Thread: Review: TI-66 (/thread-13712.html) |
Review: TI-66 - Eddie W. Shore - 09-26-2019 11:43 AM http://edspi31415.blogspot.com/2019/09/retro-review-texas-instruments-ti-66.html Company: Texas Instruments Years in Production: 1982 to 1985 Original Price: I estimate the original price to be from $70 to $100 Battery: 2 x LR44 or 2 x AR76 Type: Scientific, Keystroke Programmable Operating System: AOS Number of Digits: 10 Memory: 512 steps, which can be allocated to a maximum of 64 memory registers Accessories: Carrying Case, PC-200 Printer The TI-66 was slated to be the next generation of the TI-58C of 1978. Virtually the keyboard design and commands of the TI-58C are present in the TI-66, but there are some differences: * The TI-66 is an landscape form with a gray keyboard, where as the TI-58C (and the related TI-58 and TI-59 has a black keyboard). * The TI-66 lacks a card reader. * The TI-66 also lacked a slot for modules. * However, the TI-66 runs on coin batteries (AR76 or LR44), which can be found easily. The TI-58C family had rechargeable battery packs, which cannot be easily purchased (few vendors sell them online). * In learn mode, when a step is registered, the TI-66 displays the key you just pressed with its mnemonic. RE: Review: TI-66 - jebem - 09-26-2019 02:18 PM Thanks for the review, Eddie. As a collector point of view, this is one of my preferred Texas machines. It may be slow, but it saves energy and the battery last for many years. My take centered on the hardware side of things: https://www.hpmuseum.org/forum/thread-2837-post-24536.html#pid24536 RE: Review: TI-66 - Benjer - 09-29-2019 07:03 AM This reminded me of the TI-65 "Technical Analyst" (amazing name for a calculator, I think). One of TI's programmables which came with lots of features geared toward STEM work. I found the selection of physical constants interesting. Curiously, it lacked hyperbolic functions so I tried programming in some using the exponential function. Took the machine couple seconds to chug them out, haha. RE: Review: TI-66 - Eddie W. Shore - 09-29-2019 03:36 PM Jebem, I enjoy your tear down posts of calculators. Benjer, I don't know why TI only had 100 steps for the TI-65, it could have been the successor in the TI-58 family. I love the 65's carrying case. Eddie |