bugs and reports: January 2020

bugs and reports: January 2020 - Printable Version

+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: HP Prime (/forum-5.html)
+--- Thread: bugs and reports: January 2020 (/thread-14425.html)

bugs and reports: January 2020 - Carlos295pz - 01-27-2020 05:58 AM

I ended up making videos, since they are clearer and the gifs went wrong. Have any of these issues been closed before in another discussion?

Tested with FW 20200116 in Physical Calculator G1-[HW C] and Virtual Calculator,Most of these problems are old.

Physical Calculator

1. TDim is restored internally by pressing On + Symb, if you consult its value it is modified but it is not real, if you use the brightness to a minimum you will not notice it. TOff is not affected (although for a moment I thought so).

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 05:59 AM

2. Unusual behavior: Graphic interference in the menu area, by animating "Theo Jansen" plotted in App Geometry. Cause detected: Number of hidden objects.
It could be ignored for not being significant.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:00 AM

2.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:01 AM

3. Missing screen events, kinetic scrolling and long click. I have managed to reproduce it approximately every 30min after leaving it at rest, without any clue of the cause. It's weird because it also failed immediately after cleaning the memory. I am very lost.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:03 AM

Physical Calculator and Virtual Calculator

4. After clearing the memory, if there was an error result in the Home history, it'll disorder and rare real numbers will be inserted.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:04 AM

5. Lost objects in the Geometry App by pressing the "On" key several times during an animation.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:05 AM

6. Function app, it does not calculate area with a derived function graph, it starts to calculate quite a lot of time (HW C) and finally it does not emit a result, the calculation with integral is fast.

[Image: 49447702888_d0937ab1fe_o.png]

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:06 AM

7. EDITMAT command does not show defined title, column and row labels if a "read-only" parameter is inserted.

[Image: 49448406317_c169f0ed6f_o.png]

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:08 AM

Virtual Calculator only

8. Emulador bug: In WAIT(-1), if an alphabetic key is pressed more than 6 times, the program loading and unanswered.

RE: bugs and reports: January 2020 - Carlos295pz - 01-27-2020 06:09 AM

9. Emulator window scrolls when reallocating the focus, has a value equivalent to the title bar and also at aditional width in windows of "Microsoft Windows" when the "Hide Titlebar" option is active.

RE: bugs and reports: January 2020 - CyberAngel - 01-27-2020 06:26 AM

(01-27-2020 06:05 AM)Carlos295pz Wrote: 6. Function app, it does not calculate area with a derived function graph, it starts to calculate quite a lot of time (HW C) and finally it does not emit a result, the calculation with integral is fast.

Which version does this correctly?
I really need this to work.
VPN

RE: bugs and reports: January 2020 - toml_12953 - 01-27-2020 10:05 PM

(01-27-2020 06:05 AM)Carlos295pz Wrote: 6. Function app, it does not calculate area with a derived function graph, it starts to calculate quite a lot of time (HW C) and finally it does not emit a result, the calculation with integral is fast.

How do you enter that third equation? I end up with

δF1(X)
---------
δX=X

and no graph for it.

RE: bugs and reports: January 2020 - DrD - 01-27-2020 11:07 PM

With Textbook mode setting, use the Math Template Key, (the alpha C key).

-Dale-

RE: bugs and reports: January 2020 - cyrille de brébisson - 01-28-2020 01:00 PM

Nice find on the editmat!
Thanks for the work!

RE: bugs and reports: January 2020 - Dirk.nl - 01-28-2020 03:22 PM

Hi Cyrille,
I think the Function App can’t evaluate/handle/manipulate (what is right English word for this?) the derivate of a function.
This is also apparent from an earlier post about not being able to find an extremum of a derivate.
If you first solve this with CAS and copy the result to the Function App, you will succeed.
This is not a problem from the last update, it has (in my opinion) always existed.

RE: bugs and reports: January 2020 - cyrille de brébisson - 01-29-2020 07:38 AM

Hello,

The best way to set F2 as the derivative of F1 is to do, in CAS:
F2:=F1' quick and easy...

F2 should be d(F1(X)/X=X)...

Stuff in functions should evaluate to a number when X is a number... X² evaluates to a number...
BUT, d(F1(X)/X) evaluates to a function (of X), NOT a number!!!!
d(F1(X)/X)|X=X or, as a shortcut syntax, d(F1(X)/X=X) does evaluate to a number...

We have put some hacks in place to make is as user friendly as possible, but it's not perfect.

Cyrille

RE: bugs and reports: January 2020 - CyberAngel - 01-29-2020 07:48 AM

(01-29-2020 07:38 AM)cyrille de brébisson Wrote: Hello,

The best way to set F2 as the derivative of F1 is to do, in CAS:
F2:=F1' quick and easy...

F2 should be d(F1(X)/X=X)...

Stuff in functions should evaluate to a number when X is a number... X² evaluates to a number...
BUT, d(F1(X)/X) evaluates to a function (of X), NOT a number!!!!
d(F1(X)/X)|X=X or, as a shortcut syntax, d(F1(X)/X=X) does evaluate to a number...

We have put some hacks in place to make is as user friendly as possible, but it's not perfect.

Cyrille

hacks?
one recursive evaluation?
or
CAS Settings Page 2/2 Recursive Evaluation: 25
?

RE: bugs and reports: January 2020 - Dirk.nl - 01-29-2020 11:00 AM

Cyrille, thanks for your explanation!

RE: bugs and reports: January 2020 - pinkman - 10-10-2020 03:18 AM

(01-27-2020 06:06 AM)Carlos295pz Wrote: 7. EDITMAT command does not show defined title, column and row labels if a "read-only" parameter is inserted.

Hi Carlos,
The “title” in the example EDITMAT(MyMat, “Title”, 0) is not printed. It is printed only when the readonly argument is omitted.