+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: Not HP Calculators (/forum-7.html)
+--- Forum: Not quite HP Calculators - but related (/forum-8.html)
+--- Thread: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ (/thread-15638.html)
СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - SlideRule - 09-25-2020 11:19 AM
An interesting, 226 page publication, Directory According to calculations on Microcalculators, for MK series calculators ?
1 Reverse Microcalculators Complete Logic of Calculations (7-29)
embedded references to HP-15C, HP-41C etc
2 Microcalculators with Algebraic Logic of Calculations (30-55)
3 Programming Simple Computations (36-63)
4 Calculation of Elementary Functions, Multiple Members & Digital Sequences (64-78)
5 Software Implementation of Key Numerical Methods (79-149)
6 Calculation of Special Functions (150-175)
7 Examples of Calculation of Electrical & Electronic Circuits & Devices (176-195)
Annex (196-220)
BEST!
SlideRule
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - toml_12953 - 09-25-2020 05:48 PM
(09-25-2020 11:19 AM)SlideRule Wrote: An interesting, 226 page publication, Directory According to calculations on Microcalculators, for MK series calculators ?
1 Reverse Microcalculators Complete Logic of Calculations (7-29)
embedded references to HP-15C, HP-41C etc
2 Microcalculators with Algebraic Logic of Calculations (30-55)
3 Programming Simple Computations (36-63)
4 Calculation of Elementary Functions, Multiple Members & Digital Sequences (64-78)
5 Software Implementation of Key Numerical Methods (79-149)
6 Calculation of Special Functions (150-175)
7 Examples of Calculation of Electrical & Electronic Circuits & Devices (176-195)
Annex (196-220)
BEST!
SlideRule
That looks like a good book. If Trump gets re-elected, we'll have to learn Russian so we can understand his boss in Moscow. Then we'll be able to read this book with no translation. If Biden gets elected, is there an English translation of the book somewhere?
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - pinkman - 09-25-2020 08:05 PM
(09-25-2020 05:48 PM)toml_12953 Wrote: That looks like a good book. If Trump gets re-elected, we'll have to learn Russian so we can understand his boss in Moscow. Then we'll be able to read this book with no translation. If Biden gets elected, is there an English translation of the book somewhere?
Absolutely off topic and borderline but very funny!
(from a foreign point of view)
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - Leonid - 09-26-2020 06:35 AM
This is last edition of this book, “Modern foreign calculators”:
https://books.google.ru/books?id=NIJyCQAAQBA Mostly for TI 89/92 but also including description HP 15C, 41, 48 and others calculators
(pure PDF magnet-link, 7MB)
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - Karl-Ludwig Butte - 09-26-2020 08:58 AM
Thanks a lot for sharing this link, SlideRule. Translating the first paragraph of page 7 answers the question, if this book is written for MK-series calculators:
"The reference book includes an extensive library of programs (over 250 of them) for mass domestic programmable micro-calculators with inverse infinitely infinite calculation logic Electronics BZ-34. They are suitable for their functional analogs Electronics MK-54 and Electronics MK-56, as well as (after a simple translation) for micro calculators HP-UC, NRLЪS, HP-21S, HP-67, etc. firm Hewlett Packard (USA). Over 50 programs for one of the most complex programmable microcalculators with algebraic logic TI-58C and TI-59 by Texas Instruments (USA) are also described. Acquaintance with them will allow readers to understand a lot of programs described in foreign literature and get skills in translation of programs."
(Translation by deepl.com)
Besides the BZ-34, the BZ-19M and the BZ-38 are mentioned.
Unfortunately the links posted by Leonid seem to broken - I receive a 404 error.
Best regards
Karl
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - Leonid - 09-26-2020 12:07 PM
(09-26-2020 08:58 AM)Karl-Ludwig Butte Wrote: Unfortunately the links posted by Leonid seem to broken - I receive a 404 error.
It's Magnet URIs (magnet links) let you download the torrent file (mentioned book) via BitTorrent clients.
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - Gene - 09-26-2020 03:03 PM
FYI all.
Yes, it is election season in the USA and emotions can run high, whether influenced by logic and facts or not. :-)
I merely want to caution all here to please keep an eye out to avoid bringing in subjects that will almost certainly cause trouble here.
There are lots and lots of places on the internet to discuss those things (facebook seems to be where most of them get posted!). Let's keep the forum focused on calculating.
Please?
thank you...
Gene
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - pinkman - 09-26-2020 06:21 PM
My apologies. Good luck for the election.
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - johanw - 09-26-2020 11:07 PM
(09-25-2020 05:48 PM)toml_12953 Wrote: That looks like a good book. If Trump gets re-elected, we'll have to learn Russian so we can understand his boss in Moscow. Then we'll be able to read this book with no translation. If Biden gets elected, is there an English translation of the book somewhere?If Biden gets elected you also may have to learn Russian: https://nypost.com/2020/09/23/hunter-biden-received-3-5m-from-russian-billionaire-report/
But considering the highly volatile polarisation in the current US elections we maybe better let that topic rest here.
RE: СПРАВОЧНИК ПО РАСЧЕТАМ НА МИКРОКАЛЬКУЛЯТОРАХ - Gene - 09-27-2020 12:50 AM
Sigh. Thread closed.