+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: Not HP Calculators (/forum-7.html)
+--- Forum: Not remotely HP Calculators (/forum-9.html)
+--- Thread: Sharp PC-1251 memory upgrade (/thread-1620.html)
Sharp PC-1251 memory upgrade - pito - 06-14-2014 10:12 PM
Hi, is there anybody who did the memory upgrade of the Sharp PC-1251?
I own the gadget and recently found an article
http://edgar-pue.tripod.com/sharp/pc1251.html
where Adam describes how he extended the ram from 3.5kB to ~18kB. The 3.5kB is a fair amount, but 18kB would be great to have. HW-wise it is not difficult, but I would be happy to hear about a success from more sources, before I start to mess with internals of my lovely calculator
Thanks.
RE: Sharp PC-1251 memory upgrade - Marcus von Cube - 06-15-2014 08:57 AM
(06-14-2014 10:12 PM)pito Wrote: Hi, is there anybody who did the memory upgrade of the Sharp PC-1251?I don't see a problem if you just properly replace the second RAM chip with a 32K SRAM and trim the plastic as is described in the latest mail on the page. I haven't tested the mod myself, though.
I own the gadget and recently found an article
http://edgar-pue.tripod.com/sharp/pc1251.html
where Adam describes how he extended the ram from 3.5kB to ~18kB. The 3.5kB is a fair amount, but 18kB would be great to have. HW-wise it is not difficult, but I would be happy to hear about a success from more sources, before I start to mess with internals of my lovely calculator
Thanks.
RE: Sharp PC-1251 memory upgrade - pito - 06-15-2014 01:27 PM
(06-15-2014 08:57 AM)Marcus von Cube Wrote: I haven't tested the mod myself, though.I cannot find the Service manual for 1251 (or for TRS-80 PC-3, 1250, 1255, maybe 1260/61).. The Adam's description may work, but a double check would be fine to make..