+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: Classifieds (/forum-6.html)
+--- Thread: HP 97 with IO module for parts (/thread-17984.html)
HP 97 with IO module for parts - RonP - 01-30-2022 08:00 PM
Nice looking HP 97 with the attached IO module. Does not work, I planned one day to repair this one, but never got to it. Does not light up, printer does not advance.
Sold for “parts”.
No box or papers.
Any reasonable offer is accepted from a lover who wants to want this one back to life again. My guess is that the problem is in the powersupply part. One of the big resistors in that part got very warm when I tried to power him up.
RE: HP 97 with IO module for parts - teenix - 01-30-2022 09:21 PM
(01-30-2022 08:00 PM)RonP Wrote: Nice looking HP 97 with the attached IO module. Does not work, I planned one day to repair this one, but never got to it. Does not light up, printer does not advance.
Sold for “parts”.
No box or papers.
Any reasonable offer is accepted from a lover who wants to want this one back to life again. My guess is that the problem is in the powersupply part. One of the big resistors in that part got very warm when I tried to power him up.
Probably one or more of the components at the top right corner of the board has gone faulty allowing the large power transistor to conduct current through that resistor. This would normally happen if the battery voltage exceeds 6 volts possibly during charging.
cheers
Tony
RE: HP 97 with IO module for parts - Duane Hess - 02-01-2022 07:54 AM
Please check your PM.
Thanks.
RE: HP 97 with IO module for parts - HP-Collection - 02-01-2022 07:31 PM
You will also find a working unit for $2150 actually.