GEODIMETER GEODAT 126 : INFORMATION REQUEST - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html) +--- Forum: Classifieds (/forum-6.html) +--- Thread: GEODIMETER GEODAT 126 : INFORMATION REQUEST (/thread-19398.html) |
GEODIMETER GEODAT 126 : INFORMATION REQUEST - 3e0_rtn - 01-09-2023 05:44 PM Hello, I have 2 units that answer the same error when I use functions which manages the memory. For instance PG returns 505505 and and P49 (Clear memory) 505. I suspect the batteries are dead. I disassembled both units but there's no value (V and mAh) on batteries. The only indications are obsolete references : 188 YYWW 41B019AC00601 ASM IN MEXICO [attachment=11601] If anyone could let me know that would be great. Thanks. RE: GEODIMETER GEODAT 126 : INFORMATION REQUEST - mfleming - 01-09-2023 10:00 PM I would guess these are NiCd batteries enclosed in shrink tubing. Peel the wrapping back to see how they are electrically connected to the board and each other. If they are a standard cell size (C cell f'instance) then you can find replacements with or without tabs at various battery suppliers including Amazon. Fun little restoration project! RE: GEODIMETER GEODAT 126 : INFORMATION REQUEST - 3e0_rtn - 01-09-2023 10:41 PM (01-09-2023 10:00 PM)mfleming Wrote: I would guess these are NiCd batteries enclosed in shrink tubing. Peel the wrapping back to see how they are electrically connected to the board and each other. If they are a standard cell size (C cell f'instance) then you can find replacements with or without tabs at various battery suppliers including Amazon.Hello Mark, HP New year ! Thanks for your reply. I took the batteries apart before reading your post. Size is 31 x 14. One is dead and the other is charging. I confirm 2 x 1.2V. I replaced the battery pack, however I still have the undocumented 505505 error. [attachment=11602] The HP-IL Module is working. CCD Module CAT'0 returns 01*GDT126A. I tried 1, SELECT, MANIO and PRSTK. Nothing wrong occured. Waiting for better days, I have to build a DB15-DB9 adaptor. Quote:Fun little restoration project!I fear it will be endless and painful. Otherwise it will end up as a paperweight. Kind regards from France. RE: GEODIMETER GEODAT 126 : INFORMATION REQUEST - 3e0_rtn - 01-17-2023 05:15 PM Given the lack of information obtained, I decided to recover the 2 HP-IL modules and to reprogram the 3 CMT-10-16K modules. Everything else goes in the trash. Fin de l’histoire. |