Epson HX-20 EpsonLink manual? - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: Not HP Calculators (/forum-7.html) +--- Forum: Not remotely HP Calculators (/forum-9.html) +--- Thread: Epson HX-20 EpsonLink manual? (/thread-19449.html) |
Epson HX-20 EpsonLink manual? - Jeff_Birt - 01-19-2023 02:56 PM A friend is looking for the manual of the Epson HX-20 ROM called 'EpsonLink'. We found an image of the ROM but it is not intuitive to use the program. Does anyone have a copy of this manual in any language? Thank you! RE: Epson HX-20 EpsonLink manual? - AndiGer - 01-19-2023 04:39 PM Have you tried at https://www.helpowl.com/manuals/Epson/HX20/62194 ? You have to create an account. Maybe it's of help. Me myself didn't use that page. So no experience with. Andi RE: Epson HX-20 EpsonLink manual? - Jeff_Birt - 01-19-2023 10:53 PM Thanks. It looks like they have four different HX-20 manuals but not that one RE: Epson HX-20 EpsonLink manual? - sp1d3rx - 03-26-2024 01:27 AM I just got an HX-20 that has EpsonLink, and I'll give you a few pointers. First, do a reset (press the button on the right) Then, do initialize, CTRL-@ After entering the date, go into basic (need to do this first) Go back to the menu, and then you can start EpsonLink. It says on the rom that its address is 6000, it's in the EXP board in the 3B rom slot. Settings: Dip switches are Off, On, On, Off It comes with a keyboard overlay... top is: PF1 - TAB CLEAR PF2 - MARGIN RELEASE PF3 - SETUP PF4 - INSERT TEXT PF5 - OUTPUT TEXT bottom is: PF1 - TAB SET PF2 - MARGIN SET PF3 - TABS & MARGIN PF4 - INSERT LINE PF5 - DELETE LINE I'm sure one of these is PF6-10 but idk which one. On the other side of the EpsonLink overlay is this overlay for the terminal emulator: top is: PF1 - PRINTER/MODEM PF2 - BLOCK RECEIVE PF3 - BLOCK TRANSMIT PF4 - 80 CHAR X 20 L PF5 - 20 CHAR X 80 L bottom is: PF1 - PAUSE/CONTINUE PF2 - TAPE RECEIVE PF3 - TAPE TRANSMIT PF4 - SETUP PF5 - EXIT I do hope this helps! RE: Epson HX-20 EpsonLink manual? - sp1d3rx - 03-27-2024 02:02 AM I figured out that shift - PF# is the top of the overlay. RE: Epson HX-20 EpsonLink manual? - Jeff_Birt - 03-27-2024 03:28 PM Thanks! |