+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: Not HP Calculators (/forum-7.html)
+--- Forum: Not remotely HP Calculators (/forum-9.html)
+--- Thread: CASIO PB110's memory OR-4? (/thread-22030.html)
CASIO PB110's memory OR-4? - zixingcheche - 07-13-2024 11:41 PM
Hi all,
the OR-1 is for PB100 to extend the memory.
does anyone know that if the OR-4 option memory could be installed into PB-100?
thanks!
RE: CASIO PB110's memory OR-4? - Jeff_Birt - 07-14-2024 12:20 AM
The PB-110 can use a PR-1 according to the manual. Link below.
I have spent a lot of time investigating how the OR-1 works and even had a PIC processor working as an OR-1 on a PB-100. Doing this I found there are two different ROM versions in the PB-100 the later version is capable of addressing 2K of additional RAM but no such modules were made. Eventually I'll get back to this project as I'm hoping to be able to make new OR-1 (OR-2?) modules.
https://archive.org/details/manual_PB110_OM_CASIO_EN
RE: CASIO PB110's memory OR-4? - dmh - 07-19-2024 12:20 PM
Here's a Casio memory module compatibility table from an old Casio brochure I have.
Note there's a typo where OR-1 and OR-4 are listed as DR-1 and DR-4.
https://www.dropbox.com/scl/fi/t6v2dbiovi0wwybb2xfkg/Casio-Memory-Modules.jpg?rlkey=v9lo6csjqvazurfdjz7ryy7gf&st=6op0vgrx&dl=0