![]() |
Astro LAB 4 Translation - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html) +--- Forum: HP Prime (/forum-5.html) +--- Thread: Astro LAB 4 Translation (/thread-4826.html) |
Astro LAB 4 Translation - Powersoft - 09-28-2015 06:15 PM Marcel, I (Google) have done the translation of the Intro file from French to Englisch. My version is running now in English. Cheers, Jan RE: Astro LAB 4 Translation - Marcel - 09-28-2015 09:43 PM Hi Jan! Thank you for this translation... Marcel RE: Astro LAB 4 Translation - Eddie W. Shore - 09-29-2015 07:55 PM Astro Lab 4 returns "Error: Invalid Input" for SunAh and PlanetCoordinates: Here is what I used for input: SunAh({2015, 9, 29.82444}) PlanetCoordinates({"SATURN",{2015,6,16}) Please advise, thanks. My setup: Latitude: 34.11837 Longitude: -117.90015 Fuseau horaire? -8 Heure d'ete? 1 Delta T? 0 RE: Astro LAB 4 Translation - Marcel - 09-29-2015 08:01 PM Hi Eddie, Be sure your Entry mode is not RPN. You also have to close } before the last ). Marcel RE: Astro LAB 4 Translation - Eddie W. Shore - 09-30-2015 12:50 PM (09-29-2015 08:01 PM)Marcel Wrote: Hi Eddie, I have checked with both Textbook and Algebraic entries. I still don't have any success. ![]() I think I have all the apps installed: (Astro Lab 4, Jupiter, Moon Phases, Rising and Setting, Season, Solar System) Running debug on SunAlphaDelta({2015,9,30}): the error occurs at L4:=AVars("coefsin"); Running debug on PlanetCoordinates({"SATURN",{2015,6,16}}): the error occurs at the same place L4: =AVars("coefsin"); Going by the manual, the Matrix M1 is supposed to be initiated while choosing the Astro Lab 4, but M1 remains unchanged. RE: Astro LAB 4 Translation - Marcel - 09-30-2015 08:02 PM Hi Eddie! May be you can redownload and reinstall.. I think that all the variables of the app are not install. You have to be in AstroLab app to be able to use it. Can you tell me when it work... P.S. I check your blog every week. Great job! Marcel RE: Astro LAB 4 Translation - Eddie W. Shore - 10-09-2015 01:45 AM (09-30-2015 08:02 PM)Marcel Wrote: Hi Eddie! Thank you! Regarding AstroLab, I reinstalled and still no success. ![]() RE: Astro LAB 4 Translation - Eddie W. Shore - 10-09-2015 01:46 AM (09-30-2015 08:02 PM)Marcel Wrote: Hi Eddie! Thank you! Regarding AstroLab, I reinstalled and still no success. ![]() This is where I installed from: http://www.hpmuseum.org/forum/thread-4246.html?highlight=astro+lab+4 Do I have the current version? RE: Astro LAB 4 Translation - Marcel - 10-09-2015 01:46 PM Hi Eddie! Yes, this is the last version. I don't know why it don't work on your Prime, you are the only one to tell me about this. To work, you have to be in the application AstroLab because the variables are in this apps so be sure to select it before any command. Marcel |