+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: Key Click on 50G not working. (/thread-6456.html)
Key Click on 50G not working. - John Colvin - 06-25-2016 07:56 PM
Not that I ever need it, but the Key Click option on the 50G produces no audible sound. Has anyone else noticed this on their 50G? It works on my 49G+, but it has an older version of the firmware.
RE: Key Click on 50G not working. - DavidM - 06-25-2016 08:57 PM
Make sure system flag 56 (eg. -56) is cleared. Key click only works if flag -56 isn't set.
If flag -56 is clear, try this as well:
Code:
440.
1.
BEEPThis should sound a beep at 440 Hz for a period of 1 second. If you don't hear that, perhaps your speaker isn't working properly.
RE: Key Click on 50G not working. - John Colvin - 06-26-2016 02:33 AM
(06-25-2016 08:57 PM)DavidM Wrote: Make sure system flag 56 (eg. -56) is cleared. Key click only works if flag -56 isn't set.
If flag -56 is clear, try this as well:
Code:
440.
1.
BEEP
This should sound a beep at 440 Hz for a period of 1 second. If you don't hear that, perhaps your speaker isn't working properly.
That was the problem. Thanks for the tip.