+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: Update of ILper v2.24, ILScope v1.54 and ILCtrl v1.16 (/thread-8734.html)
Update of ILper v2.24, ILScope v1.54 and ILCtrl v1.16 - Christoph Giesselink - 07-25-2017 05:51 PM
Hello together,
just a small update of ILPer, ILScope and ILCtrl available at http://hp.giesselink.com/hpil.htm.
I removed the "Scope" buffer implementation from ILPer and ILScope and replaced the text output engine by the one used for the fast printer output. In result we have a much faster synchronous Scope output like with disabled buffer but slower when only putting data into the scope buffer.
It was a design question, not to implement both, buffer and fast text output. Removing the scope buffer made things much easier. So
it's still a compromise between usability and speed. The changes don't affect the speed with disabled Scope.
In ILCtrl I fixed a nasty bug responsible that sending a sequence was not aborted after the first frame when detecting a broken loop. For some reasons the Scope inside ILCtrl don't got the fast text output engine.