41CL How-to's (using embedded serial port) [2017-12-09]

41CL How-to's (using embedded serial port) [2017-12-09] - Printable Version

+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: Articles Forum (/forum-14.html)
+--- Thread: 41CL How-to's (using embedded serial port) [2017-12-09] (/thread-9658.html)

41CL How-to's (using embedded serial port) [2017-12-09] - Sylvain Cote - 12-09-2017 02:24 PM

41CL How-to's (using embedded serial port)

Table of Content

MMU configuration for this how-to's
Copy plug-in ROM to RAM page
Copy ROM image from Flash/RAM page to computer file

Last update: 2017-12-09

MMU configuration for this how-to's

This article uses two modules: 41CL Extreme Functions (YFNX) and 41CL Update Functions (YUPS).

execute the following functions:

Code:

MMUDIS              // disable 41CL memory management unit

TURBO50             // to speed up things

MMUCLR              // clear 41CL memory management unit configuration

"YFNX"              // 41CL Extreme Functions ROM image ID

PLUGH               // plug it to logical page 7 (Interface Loop port) leaving all physical ports available

"YUPS"              // 41CL Update Functions ROM image ID

PLUGP               // plug it to logical page 6 (Printer port) leaving all physical ports available

MMUEN               // enable 41CL memory management unit

CAT then 2          // show ROMs mapped

displayed on calculator

Code:

"UPDAT XX"          // 41CL Update ROM with revision in XX

"-YFNX XX"          // 41CL Extreme ROM with revision in XX

Copy plug-in ROM to 41CL RAM page

This example will copy the time module in port 5 to physical RAM page 0x820.

execute the following functions:

Code:

"5-1>820"           // ROM module location: 4K word from logical page 5 bank 1 >to> RAM physical address 0x820000

YMCPY               // do the copying

displayed on calculator

Code:

"COPYING"

Note: you must replace the address-bank from the above example ("5-1") by your specific information based on your module location and type.

Copy ROM image from Flash/RAM page to computer file

This example saves the physical RAM page at address 0x820 in a computer file.

Connect your 41CL to your computer

Physically connect your 41CL to your computer using the serial cable.

execute the following functions:

Code:

MMUEN               // just in case, sometimes connecting/disconnecting the serial cable to/from 41CL has the effect of disabling the MMU

SERINI              // initialize the serial port

BAUD then 48        // set communication speed to 4800 bauds

Start computer program to receive upcoming ROM image.

To do this step, you have to start a command line and need to be in the folder were the clupdate program is located.

Replace the FILENAME.ROM tag in the following step, by your specific filename.
Replace the SERIAL_PORT tag in the following step, by its specific serial port:

Windows: find your serial port name with DeviceManager and use that name instead of the SERIAL_PORT tag. (ex.: COM4)
Linux..: find your serial port name in /dev folder and use that name instead of the SERIAL_PORT tag. (ex.: /dev/ttyUSB0)
macOS..: find your serial port name in /dev folder and use that name instead of the SERIAL_PORT tag. (ex.: /dev/tty.usbserial)

type the following command on your computer:

Code:

java -jar clupdate-1.1.0.jar --download FILENAME.ROM SERIAL_PORT 4800 [RETURN]

displayed on computer:

Code:

HH:MM:SS --upload   [fileName: FILENAME.ROM] [portName: SERIAL_PORT] [baudRate: 4800]

HH:MM:SS Serial     SERIAL_PORT opened.

HH:MM:SS Receiving

Warning: you now have 60 seconds to do the next steps before getting a timeout.

Export RAM/Flash page to serial port

execute the following functions:

Code:

"820000-0FFF"       // physical address 0x820000 of length 0x0FFF in RAM

YEXP                // export page

displayed on calculator:

Code:

"SENDING"

displayed on computer:

Code:

HH:MM:SS Receiving  710 2186 2186 2186 924 = 8192 bytes received

HH:MM:SS File       FILENAME.ROM saving ... done [YCRC=0x9931943C]

HH:MM:SS Serial     SERIAL_PORT closed.

Note: this RAM page currently contains the time module copied in the previous steps.

Validate integrity of the saved file

execute the following functions:

Code:

"820"               // calculating CRC of the copied module

YCRC

displayed on calculator:

Code:

"9931943C"          // value should match the above value

Note: this RAM page currently contains the time module copied in the previous steps.

41CL How-to's (using embedded serial port)

Have Fun! 8-)

Sylvain