Allschwil Meeting 2018
|
04-03-2018, 07:58 PM
Post: #1
|
|||
|
|||
Allschwil Meeting 2018
Hi Guys
I am happy to announce there will be a European HP meeting again this year. Of course, the meeting will take place again in the area of Basel / Allschwil. At the moment I can fix the date, so you can make cheap train connections or flights already: The meeting will take place on 3 November 2018 As the meeting grows bigger every year and attracts more and more participants from the whole world, I got support from Hans-Peter Bieger. Also, the location will be a bit more spacious this time. I will inform you as soon asI have more details..... |
|||
04-03-2018, 09:05 PM
Post: #2
|
|||
|
|||
RE: Allschwil Meeting 2018 | |||
04-04-2018, 03:40 AM
Post: #3
|
|||
|
|||
RE: Allschwil Meeting 2018
Hello,
I will be more than happy to join! See you soon, Giancarlo |
|||
04-04-2018, 04:27 AM
Post: #4
|
|||
|
|||
RE: Allschwil Meeting 2018
Hello,
I will be more than happy to join! See you soon, Giancarlo |
|||
04-04-2018, 05:10 AM
Post: #5
|
|||
|
|||
RE: Allschwil Meeting 2018
Great. Thanks Matthias and Hans-Peter
See you soon there! |
|||
04-04-2018, 07:18 AM
Post: #6
|
|||
|
|||
RE: Allschwil Meeting 2018
I wouldn't mind joining you for the meeting. But I can't guarantee I can convince my wife to give me two days off...
|
|||
04-04-2018, 07:56 AM
Post: #7
|
|||
|
|||
RE: Allschwil Meeting 2018
Count me in !
Regards, Meindert |
|||
04-04-2018, 09:00 AM
Post: #8
|
|||
|
|||
RE: Allschwil Meeting 2018
Can I know the exact location? So I can see if I have budget (€€ and time) to come as well.
Now that I am not anymore too far away - in terms of distance and traveling possibilities - I may come as well (Berlin vs deep South Europe with lack of infrastructure). Wikis are great, Contribute :) |
|||
04-04-2018, 11:23 AM
(This post was last modified: 04-04-2018 11:38 AM by Maximilian Hohmann.)
Post: #9
|
|||
|
|||
RE: Allschwil Meeting 2018
(04-04-2018 10:21 AM)Mike (Stgt) Wrote: ...Zermatt to take a selfie with the Matterhorn... Basel to Zermatt is roundabout 4 hours, either by train or by car (+ train as no cars are allowed there). Each way. Milan is more like 5 hours away. Each way. My wife would hate me forever for forcing this kind of torture as a day trip on her... Anyway, in November there is usually not much to see around the Alps other than clouds and Milan will be cold and rainy (if you draw a line on the map from Zermatt to Milano the midpoint is very close to where I had the luck to grow up - so I know what I am talking about). I will know if I can attend only a couple days before because the nature of my work does not allow for long term planning. It will also depend on the program of course. If it is heavily centered around post 1985 LCD stuff I will probably rather stay home and try to repair some of the pre 1985 LED calculators piling up around me ;-) NB: If I can attend I could offer to bring some navigation calculators (many of which of course have either an LED of fluorescent display otherwise I could not love them as deeply as they deserve) and maybe give a short talk about navigation tasks. |
|||
04-04-2018, 04:10 PM
Post: #10
|
|||
|
|||
RE: Allschwil Meeting 2018
(04-04-2018 10:21 AM)Mike (Stgt) Wrote:(04-04-2018 07:18 AM)Harald Wrote: ... I can't guarantee I can convince my wife to give me two days off... Thanks for all this info, it might actually help me to convince my wife. I used to work near Lörrach, but unfortunately never really went to Basel. The biggest problem are our two children, they are 1 and 2 1/2 years old and quite a handful. So it is always difficult to handle them alone. We shall see if things will have improved by November. If I can make it, I think I could probably present some insight into the classic multi emulator upgrade kit. Unfortunately the emulation part is beyond my capabilities and I am not sure in how much detail people would like to see the hardware explained and the interfacing to the original display drivers. The interfacing is based on Jacques Laportes excellent work on reverse engineering the classic and Woodstock calculators. Unfortunately it was too late to thank him for his efforts. Cheers, Harald |
|||
04-04-2018, 04:24 PM
Post: #11
|
|||
|
|||
RE: Allschwil Meeting 2018
(04-04-2018 02:29 PM)Mike (Stgt) Wrote: Milano anyone? My suggestion Basle 0504 - Arth-Goldau 0650 - Milano Centrale arrival 0935, or one hour later via Zurich -- so there is plenty more time than I have money to spend. When we have/had American visitors here they would do these kinds of day trips so that back home they could tell people that they have seen Switzerland... For me this kind of traveling does not work. |
|||
04-04-2018, 07:13 PM
Post: #12
|
|||
|
|||
RE: Allschwil Meeting 2018
We tried to make a 2-day event with a low budget for our guests. However, it seems impossible to find a location with this goal in mind. Anyway, I have some details:
The meeting room is located in the Catholic rectory in Oberwil. We have a room for presentations and a space for individual discussions. The welcome aperitif is currently not set. We can use the location until about 22:30 clock, then we have to leave until 23:30 clock. (1h to clean the kitchen) Sandwiches are prepared for lunch and cheese fondue for dinner. (all Swiss are responsible for stirring the cheese in the caquelons) So we do not waste time on transfers and we can keep the budget low. On Sundays you can visit the Basler Herbstmesse or even the museums. These museums are free on the first Sunday of each month. (November 3rd!) |
|||
04-05-2018, 04:58 AM
Post: #13
|
|||
|
|||
RE: Allschwil Meeting 2018 | |||
04-05-2018, 06:39 AM
Post: #14
|
|||
|
|||
RE: Allschwil Meeting 2018
Sehr schön. Ich freue mich.
Count me in...! Tobie |
|||
04-05-2018, 09:00 AM
Post: #15
|
|||
|
|||
RE: Allschwil Meeting 2018
I'll attend, too:-)
-- Ray |
|||
04-06-2018, 05:11 AM
Post: #16
|
|||
|
|||
RE: Allschwil Meeting 2018
(04-04-2018 07:13 PM)Hans-Peter Wrote: The meeting room is located in the Catholic rectory in Oberwil. Hmmm... I work for the Catholic Church. I wonder if I could justify this as a business trip. :-) Nuts, Bishop said no... Have fun y'all! - Evan |
|||
04-07-2018, 05:20 AM
Post: #17
|
|||
|
|||
RE: Allschwil Meeting 2018
I'd like to attend too and present some FPGA-based Saturn and Nut Prototypes. Nicer ones this time around.
|
|||
07-01-2018, 09:25 AM
Post: #18
|
|||
|
|||
RE: Allschwil Meeting 2018
I will attend together with my brother!
When you have planned for an official registration? Patrik |
|||
07-01-2018, 11:31 AM
Post: #19
|
|||
|
|||
RE: Allschwil Meeting 2018
Hi Matthias. I'll be there. P is back at school that week so won't be able to make it, I'm afraid.
|
|||
08-01-2018, 01:51 AM
Post: #20
|
|||
|
|||
RE: Allschwil Meeting 2018
Hello Matthias,
Since the meeting announcement, I have been trying to get an airplane from Montreal (YUL) to Basel (BSL) at a reasonable price. Unfortunately, the best price I was getting was around $3500.00 CAD without the hotel, which was making no sense when you compare it to the price I got 2 years ago ($1435.00 CAD with hotel). Today I checked and to my surprise, the price got reasonable again ($1585.00 CAD with hotel) ... so ... I can confirm that I will be present at this year meeting 8-) My airplane is leaving Montreal Thursday at 20h15 and I will arrive at Basel Friday at 12h35. Like 2 years ago, I will be staying at the Steinenschanze Stadthotel (Steinengraben 69 Basel) for three nights and I am leaving Basel Monday at 13h10. Sylvain |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)