Gurus???
|
05-13-2014, 05:19 PM
Post: #1
|
|||
|
|||
Gurus???
Name your top 5 HPCalc Gurus & why....
|
|||
05-13-2014, 05:46 PM
Post: #2
|
|||
|
|||
RE: Gurus??? | |||
05-13-2014, 08:55 PM
(This post was last modified: 05-13-2014 09:07 PM by Jeff_Kearns.)
Post: #3
|
|||
|
|||
RE: Gurus???
(05-13-2014 05:19 PM)John W Kercheval Wrote: Name your top 5 HPCalc Gurus & why.... Hey John - are you vying for senior member status now? ;-) There are many gurus on this forum (and in the old forum archives). I hesitate to name only 5 as that would be unfair. To name a few off the top of my head: > Katie W. > Valentin A. > Karl Schneider > Gene W. > Walter B. > Thomas Klemm > Paul Dale > Angel Martin > Gerson B. > Dave Britten > Namir > Geoff Q. > and a hundred others (whom I sincerely would not wish to offend by omitting their names)... Just take a look at the articles (new and old) section - lots of gurus there. Jeff K |
|||
05-18-2014, 02:03 PM
Post: #4
|
|||
|
|||
RE: Gurus???
No list in this context would be complete without including Tony Duell, for reverse-engineering and documenting any piece of vintage HP (and other) equipment he gets in his hands… and for generously sharing his knowledge.
Regards, Eric |
|||
05-19-2014, 06:11 AM
(This post was last modified: 05-19-2014 07:20 AM by Ángel Martin.)
Post: #5
|
|||
|
|||
RE: Gurus???
Any list like that is necessarily both incomplete and probably includes errors (like adding me as a guru is a vast exaggeration, but thanks for the gesture :-)
Here's a few more names at the top of my head that deserve inclusion: Eric Smith Thomas Okken Diego Díaz J-F Garnier Monte Dalrymple .... "To live or die by your own sword one must first learn to wield it aptly." |
|||
05-19-2014, 07:39 AM
Post: #6
|
|||
|
|||
RE: Gurus???
(05-18-2014 02:03 PM)waterlander2004 Wrote: No list in this context would be complete without including Tony Duell, for reverse-engineering and documenting any piece of vintage HP (and other) equipment he gets in his hands… and for generously sharing his knowledge. I think that's going far too far. I am certainly no guru.... |
|||
05-19-2014, 12:44 PM
(This post was last modified: 05-19-2014 12:45 PM by jebem.)
Post: #7
|
|||
|
|||
RE: Gurus???
And let's not forget to mention advanced math contributors in this MoHP forums.
(not a concise list, of course, these are just the latest contributors on threads where I was involved as well): - Dieter; - Joe Horn; - Manolo Sobrino; Jose Mesquita RadioMuseum.org member |
|||
05-20-2014, 01:51 AM
Post: #8
|
|||
|
|||
RE: Gurus???
(05-13-2014 05:19 PM)John W Kercheval Wrote: Name your top 5 HPCalc Gurus & why.... My top five gurus are selected from the HP-41/IL world ... Code: Angel Martin Master of the NUT, creator of so many ROM's and the one who always pushes the boundaries of the 41 farther away Sylvain |
|||
05-23-2014, 04:03 PM
Post: #9
|
|||
|
|||
RE: Gurus???
Angel Martin is a character on "The Rockford Files"
|
|||
05-24-2014, 07:26 AM
Post: #10
|
|||
|
|||
RE: Gurus???
(05-23-2014 04:03 PM)Vagn Anderssen Wrote: Angel Martin is a character on "The Rockford Files" interestingly it's not the same one ;-) "To live or die by your own sword one must first learn to wield it aptly." |
|||
05-24-2014, 07:47 AM
(This post was last modified: 05-24-2014 07:48 AM by Tugdual.)
Post: #11
|
|||
|
|||
RE: Gurus???
I'me quite impressed by the CORDIC algorithm and you can read on Wikipedia
Quote:Although CORDIC is similar to mathematical techniques published by Henry Briggs as early as 1624, it is optimized for low complexity finite state CPUs.So JS Walther would be my Guru. |
|||
05-24-2014, 04:25 PM
(This post was last modified: 05-24-2014 04:27 PM by Katie Wasserman.)
Post: #12
|
|||
|
|||
RE: Gurus???
(05-24-2014 07:26 AM)Ángel Martin Wrote:(05-23-2014 04:03 PM)Vagn Anderssen Wrote: Angel Martin is a character on "The Rockford Files" Yes but you're both (05-20-2014 01:51 AM)Sylvain Cote Wrote: Master of the NUT In two entirely different meanings of the word! -katie |
|||
05-24-2014, 04:42 PM
Post: #13
|
|||
|
|||
RE: Gurus?
(05-13-2014 05:19 PM)John W Kercheval Wrote: Name your top 5 HPCalc GurusBill Wickes, Charlie Patton and the whole HP 48 development team. And of course the HP-41 development team;-) That's more than 5, and there are more, but they are those who created the whole stuff. (05-13-2014 05:19 PM)John W Kercheval Wrote: & why....All Saturn-based machines. And the other team: All nut based machines. -- Ray |
|||
05-25-2014, 12:57 PM
(This post was last modified: 05-25-2014 03:36 PM by Namir.)
Post: #14
|
|||
|
|||
RE: Gurus???
Two gurus that were not mentioned so far.
The first is Jim DeArras who is a true genius. He tapped into the memory of the HP-41C and created a quad memory that did not need bank-switching (as HP had done in its labs in Corvallis). He did with a simple oscilloscope!! Jim had an insightful knowledge for the HP-41C calculator. The other guru is none other than Richard Nelson, who is a genius in bringing the community of users into the PPC, then CHHU, and now the annual HHC conferences. If you think organizing these kinds of conferences is easy, give it a try. Richard maintains a special charisma that brings HP calculator enthusiasts together. Richard was also behind the PPC-ROM project and had put a major labor of love in assembling the fantastic and detailed manual for that ROM! Namir |
|||
05-25-2014, 04:50 PM
Post: #15
|
|||
|
|||
RE: Gurus???
HrastProgrammer for his outstanding and astounding HP41CX emulators working on HP48GX, HP49G and HP50G and Jean-François Garnier with EMU41 (see : http://www.hpmuseum.org/cgi-sys/cgiwrap/...read=91719)
Kermit Antoine M. "Kermit" Couëtte |
|||
01-10-2015, 08:55 PM
(This post was last modified: 01-10-2015 08:56 PM by d b.)
Post: #16
|
|||
|
|||
RE: Gurus???
Don't forget W. Mier Jedrezejowicz, Marcus Von Cube, Kieth Jarett and Jean-Daniel Dodin.
|
|||
01-12-2015, 02:20 AM
Post: #17
|
|||
|
|||
RE: Gurus??? | |||
01-12-2015, 02:28 AM
Post: #18
|
|||
|
|||
RE: Gurus???
I started during the HP48 era, so Mika Heiskanen, Mozgy, and Jan Brittenson would be on my list.
Graph 3D | QPI | SolveSys |
|||
01-12-2015, 04:13 AM
Post: #19
|
|||
|
|||
RE: Gurus???
(05-13-2014 08:55 PM)Jeff_Kearns Wrote:(05-13-2014 05:19 PM)John W Kercheval Wrote: Name your top 5 HPCalc Gurus & why.... I am humbled to be in the list. I enjoy calculators, math, and statistics a lot. I spend each day dabbling in these subjects. The folks who visit this forum and attend the HHC conference are very smart people. I enjoy sharing some of the math discoveries here and also at the HHC conference (Thank you Eric for videotaping the HHC talks and posting them on YouTube). Namir |
|||
01-12-2015, 10:47 AM
(This post was last modified: 01-12-2015 10:48 AM by brouhaha.)
Post: #20
|
|||
|
|||
RE: Gurus???
(05-19-2014 07:39 AM)Tony Duell Wrote: I think that's going far too far. I am certainly no guru.... Like it or not, you've got a pretty good claim to be a guru about a lot of stuff, and many of us are very appreciative of that. Quote:Only the true messiah denies his divinity. Eric (a different one) |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 4 Guest(s)