HP Calc with feet & inches entry ?

[kbarb]

Wasn't there an HP calculator with which you could enter feet & inches, for either arithmetic operations, or just for conversion to decimal ? (not for conversion to metric though).
I have a recollection of something like that, perhaps on my 32S or 42S.

[EugeneNine]

48 does with the units menu

[BartDB]

The 48/49/50 has conversion for either feet or inches, but not for "feet inches" entry.

However, Joe Horn to the rescue, his FIF program converts between Feet-Inches, Fraction and Decimal.

FIF for the 48:
https://www.hpcalc.org/details/2790

FIF49 for the 49/50:
https://www.hpcalc.org/details/4824

As far as I know some other HP calculators can convert between inches and cm, but would require a program to convert feet-inches to decimal.
.

[Ken S]

There was the AEC Rom for the HP41 which had decimal feet, meters, inch and fractional which worked great. The module is hard to find though.

[Gene]

If you buy an HP 41CL then the AEC rom is included along with 500 others!

[grsbanks]

So true

Not sure which one it is, though...

Code:

0x010; AECROML.ROM; AECR; 18; AECROM, pg 1; 0x34F1B188
0x011; AECROMU.ROM; ; ; AECROM, pg 2; 0x31DD795C
...
0x0E8; AEC3L.ROM; AEC3; 18; AECROM III pg 1; 0x1B79FD88
0x0E9; AEC3U.ROM; ; 18; AECROM III, pg 2; 0x5249CCAD
...
0x16E; AECPROG.ROM; PROG; 18; Program Generator; 0x1C33B87A; 
0x16F; AECSLVR.ROM; GSLV; 18; Geometric Solver; 0x8BDB0A81;

[burkhard]

(06-28-2019 08:54 PM)grsbanks Wrote:  So true

Not sure which one it is, though...

And once one figures that out, hopefully a link to some documentation for the program!
My 41CL is armed and ready!

[Massimo Gnerucci]

(06-29-2019 04:37 AM)burkhard Wrote:  

(06-28-2019 08:54 PM)grsbanks Wrote:  So true

Not sure which one it is, though...

And once one figures that out, hopefully a link to some documentation for the program!
My 41CL is armed and ready!

You can find manuals and brochures on the 41 site that shall not be named here.

[BruceH]

(06-28-2019 03:26 AM)kbarb Wrote:  Wasn't there an HP calculator with which you could enter feet & inches, for either arithmetic operations, or just for conversion to decimal ? (not for conversion to metric though).
I have a recollection of something like that, perhaps on my 32S or 42S.

This forum thread has some useful programs for various calculator models.