Search
Member List
Calendar
Help
HP Forums
/
HP Calculators (and very old HP Computers)
/
General Forum 
/
HP-12C/P - Show X-register value on the screen in each step
/
HP-12C/P - Show X-register value on the screen in each step
|
HP-12C/P - Show X-register value on the screen in each step
|
|
01-23-2023, 04:23 AM
(This post was last modified: 01-23-2023 04:24 AM by lvt.)
Post: #1
|
|||
|
|||
|
HP-12C/P - Show X-register value on the screen in each step
How can I make the X-register value visible on the screen on my 12CP without me pressing the SST key?
For example I have a code that runs from 0 to 1000, the screen should shows 0, 1, 2, 3, 4, 5.... and so on until 1000. Can the PSE instruction be used for this? Thanks. HP-12C Gold / HP-12C Platinum |
|||
|
|
01-23-2023, 07:11 AM
Post: #2
|
|||
|
|||
|
RE: HP-12C/P - Show X-register value on the screen in each step
Yes, the PSE instruction will pause the program for approximately 1 second while it displays the current value of the X register. See page 95 of the HP-12CP Owners Handbook.
http://h10032.www1.hp.com/ctg/Manual/bpia5309.pdf |
|||
|
|
01-23-2023, 01:39 PM
(This post was last modified: 01-23-2023 01:39 PM by lvt.)
Post: #3
|
|||
|
|||
RE: HP-12C/P - Show X-register value on the screen in each step
(01-23-2023 07:11 AM)Steve Simpkin Wrote: Yes, the PSE instruction will pause the program for approximately 1 second while it displays the current value of the X register. See page 95 of the HP-12CP Owners Handbook. Thank you. HP-12C Gold / HP-12C Platinum |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)