Help with reading an old 5.25" DOS-formatted Disk
|
05-31-2015, 10:54 PM
Post: #1
|
|||
|
|||
Help with reading an old 5.25" DOS-formatted Disk
I received today an old Numerical Analysis book with legacy BASIC listings. The book includes a DOS-formatted 5.25" disk. I looked up Amazon, eBay, and the Internet at large for an external USB drive that reads 5.25" disks. I found none! The information I got basically said that one needs an old computer with a 5.25" drive.
Can anyone help me in reading my disk and emailing me a zip file containing the listings. I will be happy to mail you the disk. Please let me know if you can help me. Thanks! Namir |
|||
05-31-2015, 11:31 PM
Post: #2
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
Namir,
Your best bet is The Vintage Computer Forums: Vintage Computer I'm sure someone there would be happy to help you with this. Bill Smithville, NJ |
|||
06-01-2015, 12:46 AM
(This post was last modified: 06-01-2015 12:48 AM by Mark Hardman.)
Post: #3
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
It looks like this would be an easy DIY project.
Here's a USB to 5.25" floppy controller for $55.25USD: FC5025 USB 5.25" Floppy Controller 5.25" floppy drives are readily available on eBay for $20-$40. You'd also need a power supply for the floppy drive. Oh, and you could always house your DIY USB 5.25 floppy drive in a nice cigar box. ;-) Ceci n'est pas une signature. |
|||
06-01-2015, 12:59 AM
Post: #4
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
I have a vintage PC that I use for restoring Teledisk images from the HP Computer Museum. I should be able to read the disk. I'll PM you my address.
Dave |
|||
06-01-2015, 02:46 AM
Post: #5
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
Hey Namir,
I have an old, truly genuine IBM PC/AT that I need an excuse to test. I also have a 5.25 floppy drive sitting around, that ought to connect to any of my Win98, WinXP, or Win7 PCs. If you'd like, send me your floppy, and I'll see what I can do. Dave |
|||
06-01-2015, 08:09 PM
Post: #6
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
If you are in Europe, I might be able to help you out.
Marcus von Cube Wehrheim, Germany http://www.mvcsys.de http://wp34s.sf.net http://mvcsys.de/doc/basic-compare.html |
|||
06-01-2015, 08:58 PM
Post: #7
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk | |||
06-01-2015, 10:12 PM
Post: #8
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
I still have machines with working floppy interfaces and have 5.25in drives in my parts bin. I can help out. Greater Metro Atlanta area.
- John |
|||
06-02-2015, 08:49 AM
Post: #9
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
Thank you for your responses. I think Dave Frederickson might help me. I am sending him the disk.
Namir |
|||
06-02-2015, 10:15 AM
Post: #10
|
|||
|
|||
RE: Help with reading an old 5.25" DOS-formatted Disk
Why not just buy the Numerical Recipies CD? I recall that it has the Basic stuff as well, but I am not 100% sure. Check it out at nr.com?
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)