Threaded Mode | Linear Mode

massimo · 02-08-2014, 07:40 PM

Last night my Prime has shown a strange behavior.

Immediately after switching off, the calculator turned on right away.
After several attempts with different resets, I solved by formatting the memory of calculator.

Someone else had the same problem?

Massimo

Tugdual · 02-08-2014, 08:31 PM

Probably the calculator knows you love it, and now it doesn't want to leave you any longer ;-)
Dont' remember witnessing that glitch.

massimo · (This post was last modified: 02-08-2014 08:42 PM by massimo.)

Can be! Perhaps the calculator is jealous of other technological gadgets and wants to control me.

Anyway now it is fine.

Han · 02-08-2014, 09:12 PM

Was it plugged via USB when this was happening?

didier.gosseau · 02-09-2014, 05:04 PM

Dear Massimo,

How to you do to format the memory?

I have another strange behavior. The keyboard does not react anymore as it should.
When a press SHIFT MEM, my PRIME enters in reset mode instead of displaying the memory.

Normal reset procedure does not help.

massimo · 02-09-2014, 05:24 PM

(02-08-2014 09:12 PM)Han Wrote: Was it plugged via USB when this was happening?

Probably it started when plugged but it continued when the calc was unplugged.

massimo · (This post was last modified: 02-09-2014 05:46 PM by massimo.)

(02-09-2014 05:04 PM)didier.gosseau Wrote: How to you do to format the memory?

I used the diagnostics menu. I activated pressing the reset on the back of the calc (using a clip) and pressing 'C' 'F' 'O'. Then I choosed the FLS Utility from the menu. You can find more info into the forum.