Threaded Mode | Linear Mode

Namir · 07-29-2016, 01:11 PM

Hi All,

Anyone knows about the release date and specs for the DM42L from Swiss Micros?

Namir

Massimo Gnerucci · 07-29-2016, 01:57 PM

I think only Michael knows.

Marcio · 07-29-2016, 04:16 PM

I thought they had abandoned the 42L in favor of the 42P. Or are they going to release both?

wojtek · (This post was last modified: 07-29-2016 04:25 PM by wojtek.)

(07-29-2016 01:57 PM)Massimo Gnerucci Wrote: left is right and right is wrong

left is right and right is wrong => left is wrong :-)

Howard Owen · 07-29-2016, 06:16 PM

(07-29-2016 04:24 PM)wojtek Wrote: left is right and right is wrong => left is wrong :-)

Unless you're intransitivent.

Intransitivent adjective unwilling or refusing to apply the transitive property to jocular koans.

"He was intransitivent in his declaration that left was right."

Massimo Gnerucci · 07-29-2016, 06:42 PM

(07-29-2016 04:24 PM)wojtek Wrote:
(07-29-2016 01:57 PM)Massimo Gnerucci Wrote: left is right and right is wrong
left is right and right is wrong => left is wrong :-)

;)

As a bitwise and - if I am right - it should be: (01101000011001010110000001110100001000000110100101110011001000000111001001100000011001110110100001100100) or "he`t is r`ghd"

Guenter Schink · 07-29-2016, 06:59 PM

(07-29-2016 01:11 PM)Namir Wrote: Hi All,

Anyone knows about the release date and specs for the DM42L from Swiss Micros?

Namir

I'm going to present the not yet finished DM42(P) at the HHUC

Günter

Jake Schwartz · 07-29-2016, 08:41 PM

(07-29-2016 06:59 PM)Guenter Schink Wrote:
(07-29-2016 01:11 PM)Namir Wrote: Hi All,

Anyone knows about the release date and specs for the DM42L from Swiss Micros?

Namir

I'm going to present the not yet finished DM42(P) at the HHUC

Günter

That is something we should perhaps be promoting for the HHC2016 conference - maybe some more folks might "get off the fence" and decide to attend. If anyone is still thinking about it, check out the conference details here.

Jake

Logan · 07-30-2016, 01:41 PM

I considered attending but we have a baby due that week and I'm pretty sure my wife would appreciate it if I wasn't in Colorado Smile

Very much looking forward to more information on the DM42. Speculations run wild but it has potential to be amazing.

Guenter Schink · 07-30-2016, 08:33 PM

(07-29-2016 08:41 PM)Jake Schwartz Wrote:
(07-29-2016 06:59 PM)Guenter Schink Wrote: I'm going to present the not yet finished DM42(P) at the HHUC

Günter

That is something we should perhaps be promoting for the HHC2016 conference - maybe some more folks might "get off the fence" and decide to attend. If anyone is still thinking about it, check out the conference details here.

Jake

I just asked Gene to change the title from "New kid on the Block" to "New kid on the Block - DM42". That should give interested people an idea of what I'm going to talk about.

Günter

Jlouis · 07-31-2016, 11:18 AM

(07-30-2016 08:33 PM)Guenter Schink Wrote:
(07-29-2016 08:41 PM)Jake Schwartz Wrote: That is something we should perhaps be promoting for the HHC2016 conference - maybe some more folks might "get off the fence" and decide to attend. If anyone is still thinking about it, check out the conference details here.

Jake

I just asked Gene to change the title from "New kid on the Block" to "New kid on the Block - DM42". That should give interested people an idea of what I'm going to talk about.

Günter

Hi Gunter, I am really interested in your presentation, but I really can not go the the HHC2016, so I will eagerly wait for the youtube video to satisfy my curiosity in what are you going to talk about de DM42!!

Cheers from the olimpic Rio de Janeiro!!

JL

Namir · 07-31-2016, 11:58 AM

Gunter,

How did you convince Michael to lend you a DM42 prototype? I was in Lausanne, Switzerland, 2 weeks ago and was thinking about contacting and meeting Michael in Zurich. My wife was not two happy about the 6 hour train round trip to visit Zurich.

I was hoping the DM42 would be available by late July or early August. That's why I started this thread.

Looking forward to your presentation at HHC2016.

Namir

Guenter Schink · 07-31-2016, 06:51 PM

(07-31-2016 11:58 AM)Namir Wrote: Gunter,

How did you convince Michael to lend you a DM42 prototype? I was in Lausanne, Switzerland, 2 weeks ago and was thinking about contacting and meeting Michael in Zurich. My wife was not two happy about the 6 hour train round trip to visit Zurich.

I was hoping the DM42 would be available by late July or early August. That's why I started this thread.

Looking forward to your presentation at HHC2016.

Namir

Namir,

because Michael sees the presentation as a collaborative effort. Without his background information and help I couldn't say much about the DM42.

You know, things always come later than it is hoped for.

Günter

Namir · 07-31-2016, 07:38 PM

Quote:Namir,

because Michael sees the presentation as a collaborative effort. Without his background information and help I couldn't say much about the DM42.

You know, things always come later than it is hoped for.

Günter

Can I ask how many display lines the DM42P (I assume 42P is correct) has?

Namir

Guenter Schink · 07-31-2016, 08:21 PM

(07-31-2016 07:38 PM)Namir Wrote:
Quote:Namir,

because Michael sees the presentation as a collaborative effort. Without his background information and help I couldn't say much about the DM42.

You know, things always come later than it is hoped for.

Günter

Can I ask how many display lines the DM42P (I assume 42P is correct) has?

Namir

Sorry Namir, I can't release any details prior to the HHUC. It's only one and a half month away, so please be patient. Smile

Günter

**rprosperi** · 07-31-2016, 08:28 PM

(07-31-2016 07:38 PM)Namir Wrote: Can I ask how many display lines the DM42P (I assume 42P is correct) has?

I have no inside information, but pretty sure the answer is 4 lines (X, Y, Z, T)plus the soft menus. Any other choice for the 42S with a screen this large would not make sense. Why would you show 3? What would you put on a 5th line? Just guessing here, but it makes sense.

Namir · 07-31-2016, 09:40 PM

(07-31-2016 06:51 PM)Guenter Schink Wrote: because Michael sees the presentation as a collaborative effort. Without his background information and help I couldn't say much about the DM42.

You know, things always come later than it is hoped for.

Günter

OK I will wait. Please encourage Michael to sell it through Amazon, so members of this forum can buy it through Amazon and help Swiss Micros' standing with Amazon.

Namir

Jeff O. · 08-01-2016, 11:43 AM

(07-31-2016 08:28 PM)rprosperi Wrote: What would you put on a 5th line?

Not that I'm advocating or expecting it, but, how about Last X? It may be considered at least a pseudo stack register - I've always thought it would be useful to see what's there on an ongoing basis.

Thomas Okken · 09-04-2016, 05:31 PM

(08-01-2016 11:43 AM)Jeff O. Wrote:
(07-31-2016 08:28 PM)rprosperi Wrote: What would you put on a 5th line?

Not that I'm advocating or expecting it, but, how about Last X? It may be considered at least a pseudo stack register - I've always thought it would be useful to see what's there on an ongoing basis.

Also, to be able to see all four stack registers and a menu at the same time. Or view more program lines. There's cool things to use the extra space for, and if they are indeed going that way, they could lift a lot of useful logic from Byron Foster's Free42 port ("42s" in the iTunes App Store) which does all of these things.

Logan · 09-19-2016, 12:12 PM

Günter,

I loved the presentation, I'm glad that was uploaded. Very excited, it's almost everything I wanted, being able to see the menu and ALL of the stack plus LAST X is really neat, also loved the program demo where you could see 9 lines all at once. Very cool and I'm more than ready to give my money Smile