Threaded Mode | Linear Mode

John Colvin · 08-23-2016, 08:46 PM

I was playing with my 35s today and after pressing the R/S key several times, a flashing Memory Clear message appeared on the display. I could not turn off the calculator with the LS-On key so I removed the batteries. After replacing the batteries the flashing Memory Clear message was still there. I also tried the reset on the back to no avail. Any idea as to what happened and is there a way to reboot this thing?

Marcio · (This post was last modified: 08-23-2016 11:26 PM by Marcio.)

You're not the first to report this kind of problem. See this thread.

Have you tried shorting the terminals together?

BartDB · 08-25-2016, 09:49 AM

Also ensure you have good batteries, this behaviour also occurs when the batteries start getting a bit low.

John Colvin · 08-25-2016, 06:56 PM

(08-25-2016 09:49 AM)BartDB Wrote: Also ensure you have good batteries, this behaviour also occurs when the batteries start getting a bit low.

That is what I suspect-low batteries. I did not notice a low battery warning though.