How will compete hp-prime with TI-Innovator project?
|
08-29-2016, 12:27 PM
Post: #1
|
|||
|
|||
How will compete hp-prime with TI-Innovator project?
https://education.ti.com/en/us/products/...s/overview
I would like to see, with the wiring project, the father of arduino http://wiring.org.co |
|||
08-29-2016, 02:39 PM
Post: #2
|
|||
|
|||
RE: How will compete hp-prime with TI-Innovator project?
1) Support USB-host serial things in the HP Prime OS
2) Provide HPPPL commands for Serial write/read 3) Done. That would beat ti-innovator instantly My website: ried.cl |
|||
08-29-2016, 02:40 PM
Post: #3
|
|||
|
|||
RE: How will compete hp-prime with TI-Innovator project?
I see now why TI nerfed the Nspire's built in programming capabilities - they knew they would want to blag you with over priced programmable peripherals at some point in the future.
An expensive way to make LEDs turn on and off - that Holy Grail of school IT provision. |
|||
09-01-2016, 05:29 AM
Post: #4
|
|||
|
|||
RE: How will compete hp-prime with TI-Innovator project?
Quote:they knew they would want to blag you with over priced programmable peripherals at some point in the future.Actually, the price tag of the TI-Innovator is much lower than we could have feared, given the severe overpricing habits of the education market However... Quote:An expensive way to make LEDs turn on and off - that Holy Grail of school IT provision.... you're still right, of course. It's a fact that most models of developer-oriented COMs and SBCs based on ARM SoCs are (much) cheaper, more open and uniformly much more powerful, in terms of computing power, storage space and I/O capabilities, than a Nspire CX, or a Prime. Out of the box, the boards run more or less standard Linux kernels. The calculators' built-in screen, keyboard and battery, which make them autonomous, aren't that useful when connected to non-self-powered lab equipment anyway... |
|||
09-01-2016, 06:53 AM
(This post was last modified: 09-01-2016 10:56 AM by Chasfield.)
Post: #5
|
|||
|
|||
RE: How will compete hp-prime with TI-Innovator project?
No sign of a UK price for these but a TI89 costs lap-top money over here.
The TI system as shown puts two "black boxes" between the student and the LEDs that are being power-cycled. I don't see how such hardware abstraction moves the learner any nearer to understanding the essence of a microprocessor system. An old style Z80 based tutor board, with 2K RAM, hex display and keypad puts the student much closer to what is going on. Such a basic device might not seem as cool as the TI set-up, nor would it excite teachers with poor technical knowledge when they attend Powerpoint-saturated educational conferences but when you need to learn something that is difficult then there is no alternative to sitting down and learning something difficult. |
|||
09-05-2016, 09:09 AM
Post: #6
|
|||
|
|||
RE: How will compete hp-prime with TI-Innovator project?
BTW, the TI-Innovator is derived from one of the MSP432 Launchpad boards, which are much cheaper. Therefore, one can leverage a subset of the TI-Innovator features, e.g. light sensor and buzzer are missing out of the box, at a fraction of the price tag - less than $15 - by reflashing the appropriate Launchpad model with the TI-Innovator firmware. The Launchpad has a micro-USB interface while the calculator has a mini-USB one, so one needs to buy one or more adapter cables.
This is not theoretical, critor and/or Adriweb have tested it - I'm basically summarizing https://tiplanet.org/forum/viewtopic.php?f=49&t=18947 here. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)