Post Reply 
HP-67 Card Operation Query
03-05-2019, 12:21 PM
Post: #1
HP-67 Card Operation Query
Hi All,

Can anyone help with a spare few moments and a working HP67 card reader?

While a program is running, you can position a card in the card reader slot ready to start reading during a Pause instruction. The motor switch will be tripped, but because the program is running it will be ignored until the Pause instruction executes.

I was playing with the 67 emulator and if I write a simple loop program like...

LBL A
7
Enter
Add
GTO A

If I press R/S to halt the program, the card is read into memory.

Just trying to find out if this is how a real 67 works?

cheers

Tony
Find all posts by this user
Quote this message in a reply
03-05-2019, 12:57 PM (This post was last modified: 03-05-2019 01:04 PM by Thomas Okken.)
Post: #2
RE: HP-67 Card Operation Query
Yes, that is how the real 67 behaves. When program execution stops because of a PAUSE or R/S instruction, a RTN with no pending GSB, an overflow, or being interrupted by pressing R/S, the card will be read. When program execution stops because of an Error, the card is not read until the Error is cleared.
Visit this user's website Find all posts by this user
Quote this message in a reply
03-06-2019, 12:39 AM
Post: #3
RE: HP-67 Card Operation Query
(03-05-2019 12:57 PM)Thomas Okken Wrote:  Yes, that is how the real 67 behaves. When program execution stops because of a PAUSE or R/S instruction, a RTN with no pending GSB, an overflow, or being interrupted by pressing R/S, the card will be read. When program execution stops because of an Error, the card is not read until the Error is cleared.

Awesome

Thanks for your effort :-)
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)