Astro LAB 4 Translation
|
09-28-2015, 06:15 PM
Post: #1
|
|||
|
|||
Astro LAB 4 Translation
Marcel,
I (Google) have done the translation of the Intro file from French to Englisch. My version is running now in English. Cheers, Jan |
|||
09-28-2015, 09:43 PM
Post: #2
|
|||
|
|||
RE: Astro LAB 4 Translation
Hi Jan!
Thank you for this translation... Marcel |
|||
09-29-2015, 07:55 PM
Post: #3
|
|||
|
|||
RE: Astro LAB 4 Translation
Astro Lab 4 returns "Error: Invalid Input" for SunAh and PlanetCoordinates:
Here is what I used for input: SunAh({2015, 9, 29.82444}) PlanetCoordinates({"SATURN",{2015,6,16}) Please advise, thanks. My setup: Latitude: 34.11837 Longitude: -117.90015 Fuseau horaire? -8 Heure d'ete? 1 Delta T? 0 |
|||
09-29-2015, 08:01 PM
(This post was last modified: 09-29-2015 08:04 PM by Marcel.)
Post: #4
|
|||
|
|||
RE: Astro LAB 4 Translation
Hi Eddie,
Be sure your Entry mode is not RPN. You also have to close } before the last ). Marcel |
|||
09-30-2015, 12:50 PM
(This post was last modified: 09-30-2015 01:05 PM by Eddie W. Shore.)
Post: #5
|
|||
|
|||
RE: Astro LAB 4 Translation
(09-29-2015 08:01 PM)Marcel Wrote: Hi Eddie, I have checked with both Textbook and Algebraic entries. I still don't have any success. I think I have all the apps installed: (Astro Lab 4, Jupiter, Moon Phases, Rising and Setting, Season, Solar System) Running debug on SunAlphaDelta({2015,9,30}): the error occurs at L4:=AVars("coefsin"); Running debug on PlanetCoordinates({"SATURN",{2015,6,16}}): the error occurs at the same place L4: =AVars("coefsin"); Going by the manual, the Matrix M1 is supposed to be initiated while choosing the Astro Lab 4, but M1 remains unchanged. |
|||
09-30-2015, 08:02 PM
(This post was last modified: 10-01-2015 12:31 AM by Marcel.)
Post: #6
|
|||
|
|||
RE: Astro LAB 4 Translation
Hi Eddie!
May be you can redownload and reinstall.. I think that all the variables of the app are not install. You have to be in AstroLab app to be able to use it. Can you tell me when it work... P.S. I check your blog every week. Great job! Marcel |
|||
10-09-2015, 01:45 AM
Post: #7
|
|||
|
|||
RE: Astro LAB 4 Translation
(09-30-2015 08:02 PM)Marcel Wrote: Hi Eddie! Thank you! Regarding AstroLab, I reinstalled and still no success. |
|||
10-09-2015, 01:46 AM
Post: #8
|
|||
|
|||
RE: Astro LAB 4 Translation
(09-30-2015 08:02 PM)Marcel Wrote: Hi Eddie! Thank you! Regarding AstroLab, I reinstalled and still no success. This is where I installed from: http://www.hpmuseum.org/forum/thread-424...stro+lab+4 Do I have the current version? |
|||
10-09-2015, 01:46 PM
(This post was last modified: 10-09-2015 01:47 PM by Marcel.)
Post: #9
|
|||
|
|||
RE: Astro LAB 4 Translation
Hi Eddie!
Yes, this is the last version. I don't know why it don't work on your Prime, you are the only one to tell me about this. To work, you have to be in the application AstroLab because the variables are in this apps so be sure to select it before any command. Marcel |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: