Post Reply 
What I'd like for Xmas from those nice PPL at HP
12-15-2015, 10:21 PM
Post: #1
What I'd like for Xmas from those nice PPL at HP
(Perhaps some of these are already possible in the PPL, but I just havent seen them yet)

GENERAL SYNTAX:
To be allowed a list of variables to be returned in an assignment.
IF my_gps returns {DATA_VALID,Latitude,Long}
Instead of
LOC:=my_gps...IF LOC(1) use(LOC(2))
I want a list of results variables before the assignment := :
{DVALID,LOCATION}:=my_gps() ...
IF DVALID THEN use(LOCATION);...
is much clearer than LOC:= ...
IF LOC(1) then use LOC(2)...

SPECIFIC COMMANDS:

CHOOSE: (See my thread)
Given an empty list return 0.
Given a long list filter selection: display only results containing on-Screen text.

DRAWMENU save and restore.
Recognition of buttons...
IFBUT ==BUT("Edit")
IFBUT ==BUT(1)
rather than IF_mouse_pixels==



INPUT:
When selecting checkboxes, allowing 2 columns can be useful - but sometimes 1 column with a longer text is better. The columns may be easier to read if they ran downwards:
a D
b E
c F
Not
A b
C d
E f
So −more_optional_parameters useful.
the_syntax_for_multiple_selections in input or choose _could_be_easier (see_my_thread)
300+ rather than only 142 checkboxes would be nice.

NOTES
An append option would be useful for errorlogs: NOTES("LOG",APPEND):="DIVBY0"
Or Printfile?

ROUND:
Allow user to request rounding to 31 places without aborting a program. Improves robustness and portability. (At present my ZIPP program keels over if 13 digits of rounding are specified).

XTICK YTICK
Let us have more ticks - at least two - Miles and km are obvious examples, but also cm and mm would be nice if cm were a different colour/style. Either displayed along the axes or the screen edges ( for when the axis is offscreen or to help seperate the units).

Stephen Lewkowicz (G1CMZ)
https://my.numworks.com/python/steveg1cmz
Visit this user's website Find all posts by this user
Quote this message in a reply
12-15-2015, 10:41 PM
Post: #2
RE: What I'd like for Xmas from those nice PPL at HP
I just want a CMT 300

Wink

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
12-15-2015, 11:36 PM
Post: #3
RE: What I'd like for Xmas from those nice PPL at HP
Please post link of CMT 300

-Luis-
Find all posts by this user
Quote this message in a reply
12-16-2015, 12:12 AM (This post was last modified: 12-16-2015 12:15 AM by TASP.)
Post: #4
RE: What I'd like for Xmas from those nice PPL at HP
[Image: 2015-11-09%2022.00.39_zpspmbiiv0z.jpg]


We should probably just have a separate Santa thread, didn't mean to hijack this one.

Still if one turns up under the tree . . .

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
12-17-2015, 12:42 AM
Post: #5
RE: What I'd like for Xmas from those nice PPL at HP
What does that do?

-Luis-
Find all posts by this user
Quote this message in a reply
12-17-2015, 01:30 AM
Post: #6
RE: What I'd like for Xmas from those nice PPL at HP
It's Corvallis Microtechnology's take on an HP3468.

Only without the HPIL. And WAY smaller, and WAY cooler.


Damn my covetous nature.

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
12-17-2015, 08:22 AM
Post: #7
RE: What I'd like for Xmas from those nice PPL at HP
A CMT-300 or equal connecting to the Prime to the USB port. Really want a measuring system connecting to Prime.. Will it happen?
Find all posts by this user
Quote this message in a reply
12-17-2015, 12:06 PM (This post was last modified: 12-17-2015 12:15 PM by Fortin.)
Post: #8
RE: What I'd like for Xmas from those nice PPL at HP
(12-17-2015 08:22 AM)Graan Wrote:  A CMT-300 or equal connecting to the Prime to the USB port. Really want a measuring system connecting to Prime.. Will it happen?

Would this do it? Or are you looking for something else? (I believe that you'll need Hardware C to enable the DataStreamer app)

http://fourieredu.com/store/products/hp-...ating-lab/
http://fourieredu.com/store/products/tri...e-voltage/

https://www.educalc.net/2336473.page
Find all posts by this user
Quote this message in a reply
12-18-2015, 02:17 PM
Post: #9
RE: What I'd like for Xmas from those nice PPL at HP
If you go to their home site(press home) you are redirected to their new site http://einsteinworld.com/ Seems they switched to Android now.

What Im looking for is some kind of open communication interface to the Prime for measurements. Electronics has developed a lot and with todays intelligent cirquits it should be simple to design a interface if possible. But Prime seems to be a quite closed system. I dont think the purpose of the Prime is to be able to do this.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)