Post Reply 
Got a HP-41CV Half Nut as a early Christmas gift!
12-22-2015, 05:13 AM
Post: #21
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 04:14 AM)TASP Wrote:  82143 printer and an 82162 printer

And then you have to get the cassette drive and an HP-97, since they take the same battery. Think of all the money you'll save by sharing batteries! ;-)
Find all posts by this user
Quote this message in a reply
12-22-2015, 08:13 AM
Post: #22
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 03:46 AM)rprosperi Wrote:  One of the first things to do is learn Synthetics using Bill Wickes' Green Book (it's in the MoHPC USB drive). I still recall with great fondness the day I got and devoured this book with 41 in-hand.

Oh, those long nights without batteries, trying to recover from a crash... ;)

Greetings,
    Massimo

-+×÷ ↔ left is right and right is wrong
Visit this user's website Find all posts by this user
Quote this message in a reply
12-22-2015, 08:51 AM
Post: #23
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 05:13 AM)quantalume Wrote:  Think of all the money you'll save by sharing batteries! ;-)

Ooh, that virus' spread again! Duck and cover!!

([:-/
Find all posts by this user
Quote this message in a reply
12-22-2015, 12:19 PM (This post was last modified: 12-22-2015 08:55 PM by jebem.)
Post: #24
RE: Got a HP-41CV Half Nut as a early Christmas gift!
Again, Thank you all for the so many suggestions on what we can do with this great machine.
The Clonix NoV sounds very interesting, but I have yet to see how much will it cost as I couldn't find any prices on Diego's site.

Did I mention that the buzzer can make very nice clean sounds?
I wonder why the newest HP Prime was not equipped with similar feature, despite having provision to connect one buzzer on the main PCA.

And time to a partial tear down.
When removing the four rubber feet to undo the four screws, I could confirm its original condition.
The machine was never opened before.

Somehow this half nut version is a little disappointing at the component count.
I guess the ownership satisfaction will be greater on the full nuts Smile

Main active components:
5061-7255 Hybrid Memory/Display Driver from 1985 week 50 <-- Corrected after Walter's observation. Danke!
1LM2-002 SoC from 1985 week 39.

[Image: hp-41cv_hn_004.jpg] [Image: hp-41cv_hn_005.jpg] [Image: hp-41cv_hn_006.jpg]

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
12-22-2015, 12:44 PM
Post: #25
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 05:13 AM)quantalume Wrote:  
(12-22-2015 04:14 AM)TASP Wrote:  82143 printer and an 82162 printer

And then you have to get the cassette drive and an HP-97, since they take the same battery. Think of all the money you'll save by sharing batteries! ;-)

And it's possible to have it both ways, share a battery pack among the devices, and with the $$$ savings, buy spare battery packs !!!!

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
12-22-2015, 01:33 PM
Post: #26
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 12:19 PM)jebem Wrote:  Somehow this half nut version is a little disappointing at the component count.
I guess the ownership satisfaction will be greater on the full nuts Smile

Main active components:
5061-7255 Hybrid Memory/Display Driver from 1895 week 50.

Don't you exaggerate!

d:-)
Find all posts by this user
Quote this message in a reply
12-22-2015, 06:03 PM
Post: #27
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 04:14 AM)TASP Wrote:  Don't forget the 3468 multimeter. Even if you don't need one, just an uber cool thing to have.

And here are some more 'must haves':

video interface
wand
82143 printer and an 82162 printer
card reader (and lotsa cards !!!)

the 82166 battery charger is an odd little critter too

Before spending money on lots of accessories, consider whether you a re looking for the functionality or a collector's item. If it's the functionality, then an HP-IL interface and PIL-Box offer access to virtual printers, displays, mass storage devices, and the huge collection of software in the LIF archives.

(12-22-2015 04:14 AM)TASP Wrote:  the 82166 battery charger is an odd little critter too

I think you mean the 92266A N-cell charger.

Dave
Find all posts by this user
Quote this message in a reply
12-22-2015, 08:53 PM
Post: #28
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-22-2015 01:33 PM)walter b Wrote:  
(12-22-2015 12:19 PM)jebem Wrote:  Somehow this half nut version is a little disappointing at the component count.
I guess the ownership satisfaction will be greater on the full nuts Smile

Main active components:
5061-7255 Hybrid Memory/Display Driver from 1895 week 50.

Don't you exaggerate!

d:-)

Damn! Now I have revealed my best kept secret:
I'm a time traveler from a distant future revisiting familiar places in the past to transfer technology.
Now I have to correct this asap.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
12-31-2015, 09:15 PM
Post: #29
RE: Got a HP-41CV Half Nut as a early Christmas gift!
82104A Card Reader repair

It was a smooth procedure and it worked nicely after replacing the gummy drive wheel.

Basically I have followed the HP Service Manual included in the MoHPC USB documentation.

And I had a look on some publications freely available online as well (Thank you all):
HHC 2014: HP-41 Card reader drive wheel replacement demonstration, by Geoff Quickfall
Repairing the hp 82104A Card Reader, by Dave the "lostrabbit" and Ty Rogers
HP 82104A (HP-41) Card Reader Repair, by Peter M. Geiser
HP-41C Card Reader Repair - The Short Fix Approach, by Mark Hoskins

Following are some pictures taken during the repair operation.

[Image: HP-CR-82104A_002.jpg] [Image: HP-CR-82104A_005.jpg]

[Image: HP-CR-82104A_016.jpg] [Image: HP-CR-82104A_019.jpg]

[Image: HP-CR-82104A_031.jpg] [Image: HP-CR-82104A_035.jpg]

New rubber wheels were installed. Perfect match and excellent drive.

[Image: HP-CR-82104A_036.jpg] [Image: HP-CR-82104A_037.jpg]

Final testing.
Before assembling the case enclosure (Not shown in the above pictures):
- Have checked the two switches for proper operation;
- Have adjusted the drive wheel pressure by measuring the motor current;
- Tested for good magnetic card write/read operation.

[Image: HP-CR-82104A_052.jpg] [Image: HP-CR-82104A_053.jpg]

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
12-31-2015, 09:30 PM
Post: #30
RE: Got a HP-41CV Half Nut as a early Christmas gift!
Muito obrigado, Jorge, por a sua documentação.

Can't help it, reminds me of Geoff's book project. Wink

Feliz Ano Novo!

d:-)
Find all posts by this user
Quote this message in a reply
12-31-2015, 11:44 PM
Post: #31
RE: Got a HP-41CV Half Nut as a early Christmas gift!
(12-31-2015 09:30 PM)walter b Wrote:  Feliz Ano Novo!

Danke!
We are almost done here in Lisbon... one more bottle of red wine and for sure I will not see the New Year coming...

Frohes Neues Jahr!

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)