The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / StreamSmart 400, missing wire

Post Reply 
StreamSmart 400, missing wire
05-06-2014, 01:00 PM
Post: #1
inakiz Offline
Junior Member
 		Posts: 10
Joined: Dec 2013
StreamSmart 400, missing wire
Hi.
I have opened a StreamSmart 400 to see what is inside. To my surprise one of the cables coming in from the "serial" cable is not connected to anything. There are four cables: green, white, red and black. The former three have a labeled position in the board (G,W,R) but the black one is floating around. Probably it was soldered to some part, but I cannot find a clear pad where it should be soldered.
Please, anyone having this device would take a look where the black cable is connected?. :-)

Inakiz.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
StreamSmart 400, missing wire - inakiz - 05-06-2014 01:00 PM
RE: StreamSmart 400, missing wire - eried - 05-07-2014, 07:06 PM
RE: StreamSmart 400, missing wire - inakiz - 05-06-2014, 09:30 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication