HP Forums / HP Calculators (and very old HP Computers) / General Forum v / 41CL and Mac Mojave - USB-to-serial device no longer in /dev

Post Reply 
41CL and Mac Mojave - USB-to-serial device no longer in /dev
01-03-2019, 08:30 PM (This post was last modified: 01-03-2019 08:32 PM by Sylvain Cote.)
Post: #5
Sylvain Cote Offline
Senior Member
 		Posts: 2,169
Joined: Dec 2013
RE: 41CL and Mac Mojave - USB-to-serial device no longer in /dev
If you do not see your USB device in /dev it means that you need to install a driver.

I just tried a USB-to-Serial dongle from TI that I do not have the driver on macOS 10.14.2.
When I do a USB enumeration (system_profiler and lsusb from macport) I can see the chip information, but the device is not shown in /dev because I do not have the serial driver for the USB device.

So my suggestion will be to install the prolific serial driver for your prolific chip if you want to update your 41CL on macOS.

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL and Mac Mojave - USB-to-serial device no longer in /dev - Sylvain Cote - 01-03-2019 08:30 PM



User(s) browsing this thread: 6 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication