Post Reply 
HP48GX
05-11-2014, 01:23 PM
Post: #4
RE: HP48GX
(05-11-2014 01:06 PM)Vagn Anderssen Wrote:  Hello:

Here in Helsinki, it can get cold.

This is why I am stepping up from the HP97 to the 48GX. I will be buying a NOS unit here in Finland for 450 euros.

NEW TO THE UNIT!
What pacs, enhancements, books & software do you rec for it? Leather cases? My first new unit in 33 years!
I intend to delve into it hard. Help me find the deep end, please!
Vagn Anderssen (Knutssen)
Hello Vagn and welcome to the forum:-)

For that price, it should be a unit with the high contrast B/W display. This can be seen even if the unit is off. If the LCD reflection is a very light grey, it's likely to be a newer unit with high contrast LCD. If the LCD reflection shows a greenish portion, it's one of the older LCDs.

I'd recommend to get a RAM card of 128K or 256K , and check out http://www.hpcalc.org , which is _the_ software archive for the HP 48 series.

Since I'm somewhat biased, I'd also recommend to try SpeedUI, which is _the_ software turbo for the HP 48GX user interface.

Cheers

-- Ray
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP48GX - Vagn Anderssen - 05-11-2014, 01:06 PM
RE: HP48GX - walter b - 05-11-2014, 01:15 PM
RE: HP48GX - HP67 - 05-11-2014, 01:18 PM
RE: HP48GX - Raymond Del Tondo - 05-11-2014 01:23 PM
RE: HP48GX - Vagn Anderssen - 05-11-2014, 02:29 PM
RE: HP48GX - Dave Britten - 05-11-2014, 02:43 PM
RE: HP48GX - Mike Morrow - 05-11-2014, 04:22 PM
RE: HP48GX - HP67 - 05-11-2014, 04:42 PM
RE: HP48GX - Mike Morrow - 05-11-2014, 05:05 PM
RE: HP48GX - HP67 - 05-11-2014, 05:21 PM
RE: HP48GX - Raymond Del Tondo - 05-11-2014, 05:37 PM
RE: HP48GX - Dave Britten - 05-11-2014, 05:29 PM
RE: HP48GX - Steve Simpkin - 05-11-2014, 05:17 PM
RE: HP48GX - walter b - 05-11-2014, 08:07 PM
RE: HP48GX - Vagn Anderssen - 05-11-2014, 05:55 PM
RE: HP48GX - Vagn Anderssen - 05-11-2014, 07:41 PM
RE: HP48GX - Vagn Anderssen - 05-11-2014, 09:05 PM
RE: HP48GX - Brad Barton - 05-11-2014, 11:21 PM



User(s) browsing this thread: 1 Guest(s)