Post Reply 
Sharp PC-1500A with CE-150
02-23-2019, 06:27 AM
Post: #8
RE: Sharp PC-1500A with CE-150
(02-22-2019 01:58 PM)GVHOVE Wrote:  My intention was to try to connect it to my HP-41 via the HP82165A HP-IL/GPIO interface or CMT-200.
Anybody out there that has experience with that ?

You can refer to the article "Using the Radio Shack CGP-115 Plotter with the HP-41“ in the PPC Journal V11n3 p12 describing the connection with a HP-82166A GPIO converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sharp PC-1500A with CE-150 - Leviset - 02-09-2019, 09:19 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-22-2019, 03:48 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:06 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-22-2019, 01:58 PM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:09 AM
RE: Sharp PC-1500A with CE-150 - Didier Lachieze - 02-23-2019 06:27 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:19 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-27-2019, 11:05 AM
RE: Sharp PC-1500A with CE-150 - rprosperi - 02-27-2019, 01:42 PM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-27-2019, 02:15 PM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-28-2019, 10:19 AM
RE: Sharp PC-1500A with CE-150 - rprosperi - 03-02-2019, 01:29 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 03-06-2019, 01:47 PM
RE: Sharp PC-1500A with CE-150 - Xorand - 03-11-2019, 01:13 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 03-07-2019, 01:21 AM



User(s) browsing this thread: 1 Guest(s)