41CL - how to activate 9xxx configurations

[wok]

(03-19-2019 05:24 PM)Monte Dalrymple Wrote:  From the MEMORY LOST condition:

XEQ "MMUCLR"
"YFNX"
XEQ "PLUGH"
"YFNF"
XEQ "PLUG1L"
XEQ "MMUEN"
XEQ "CFGINI"
XEQ "PLUG"
"9MTH 8"


I notice that the display flashes something (perhaps "1Z DC") when the calc is turned off with this configuration. I don't know if it's supposed to do that or not. It doesn't come from YFNX.

Thank you very much Monte - this works indeed. This way the alternate configurations are initialised from the Plugs by CFGINI so that the extreme functions can recall them later on by number (RCLCFG 4-F). Then you use the Plug function to load the alternate configuration directly using the plug definition.

It seems that the flashing message is caused by the Z4DL module.
I will now dive into the incredible set of 9MTH modules mainly written and provided by Angel Martin.