newRPL - build 1255 released! [updated to 1299]

[JoJo1973]

(05-27-2019 09:18 PM)Claudio L. Wrote:  

(05-27-2019 08:08 PM)JoJo1973 Wrote:  3) Selecting the calc and pressing OK estabilishes the connection: USBSTATUS returns #0h

USBSTATUS should return #7h for a proper connection, the bits are:

1 = cable connected
2 = Host OS initialized as HID device correctly.
4 = Connection to newRPL Desktop is established.

You get a zero if you pull the cable, when you plug it, if you see the symbol in the calc come up, it means the OS registered, so now you are at #3h, if the OS doesn't recognize it, you are stuck at #1h.
When you hit OK in the dialog, you'll get a #7h.

Mixed progress:

First of all, I'm using Windows 10 and I never get a #7h when I press OK, neither on the calc nor the emulator.

Stuck with #3h, I get to transfer back and forth the emulator and the calc doing USBSEND on the sender and leaving unattended the receiver. Sometimes the transfer fails.

If I do USBSEND and 30 USBRECV on the receiver, the transfer never succeeds. Usually the receiver hangs and has to be reset/killed.

30 USBRESTORE/USBARCHIVE works perfectly, but using the Hardware menu fails always.

I tried various cables and ports on my laptop and always get the same results.