HP30b to WP34s Programming in Melbourne

[burkhard]

Re: Holding the wires to the pads...

This gentleman documented the procedure to do it fairly well using a $4 cable from Newegg. I followed his method and did it myself a bunch of times before I was lucky enough to get an "official" cable.

http://www.thereminworld.com/album/diy-c...hoto=15081

There used to be a little more of a write-up, but not much and that link seems to be dead.. Really the pictures here are the key.

It's not so hard, but make take a couple of tries.
Keep us posted!