(SOLVED) 41CL - DOUBLE HEPAX ACCESS and MMU CONFIG

[Monte Dalrymple]

(08-19-2019 06:50 PM)Sylvain Cote Wrote:  I am at work, so I cannot gives you a detailed example but since you seems to want to create your own setup, what I would do is:

1. do my first setup in set 0 (from scratch or from one of the 9... configuration)
2. copy MMU configuration set 0 to one of the in secondary MMU configuration (4..F), here for example, use 4, replacing Monte default configuration made by CFGINI
3. do my second setup in set 0 (from scratch or from one of the 9... configuration)
4. copy MMU configuration set 0 to one of the in secondary MMU configuration (4..F), here for example, use 5, replacing Monte default configuration made by CFGINI
5. ...
6. backup secondary MMU configuration to an alternate location in RAM and on an offline media
   

Sylvain

If you don't want to step on the pre-initialized alternate configurations, numbers 1, 2 and 3 are left for custom user configurations. These custom configurations can still be used with the PLUG functions: 1 uses the alias 9CFA, 2 uses the alias 9CFB, and 3 uses the alias 9BAS