The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / HP Calculators (and very old HP Computers) / General Forum v / YFNX does not work on my 41CL

Post Reply 
YFNX does not work on my 41CL
09-17-2019, 05:18 PM
Post: #1
hth Offline
Senior Member
 		Posts: 415
Joined: Mar 2014
YFNX does not work on my 41CL
If I plug in the extreme functions module with "YFNX" PLUG1L, MMUEN, a CAT 2 causes the calculator to freeze. The only thing plugged in otherwise is a time module. YFNP can be plugged in without any problems.
I am running with an old image database that came with it (from years ago) as I never managed to update the module database.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
YFNX does not work on my 41CL - hth - 09-17-2019 05:18 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 05:31 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 05:43 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 08:18 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 01:26 AM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 04:31 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 05:57 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 08:10 PM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 02:11 AM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 03:03 AM



User(s) browsing this thread: 4 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication