HP Forums / HP Calculators (and very old HP Computers) / General Forum v / YFNX does not work on my 41CL

Post Reply 
YFNX does not work on my 41CL
09-17-2019, 05:43 PM
Post: #4
hth Offline
Senior Member
 		Posts: 415
Joined: Mar 2014
RE: YFNX does not work on my 41CL
I should add that what I really want to do is to use PPLUG to map in an alternative OS in RAM. If such functionality is in YFNZ or YFNP, then I am fine with it. At least MAPEN is available for enabling mapping of the OS, but I cannot see that I can set up the OS mapping with those modules after looking in the manual.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
YFNX does not work on my 41CL - hth - 09-17-2019, 05:18 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 05:31 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019 05:43 PM
RE: YFNX does not work on my 41CL - hth - 09-17-2019, 08:18 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 01:26 AM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 04:31 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 05:57 PM
RE: YFNX does not work on my 41CL - hth - 09-18-2019, 08:10 PM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 02:11 AM
RE: YFNX does not work on my 41CL - hth - 09-19-2019, 03:03 AM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication