Post Reply 
HP 42S - wobbly "+" key
09-18-2019, 01:13 AM
Post: #2
RE: HP 42S - wobbly "+" key
If the is no mechanical damage to the key (that is, the hinge at the bottom of the key and the dome beneath the key are unbroken) and keypresses are intermittent, then there may be debris beneath the key that is preventing electrical closure when the key is pressed. A drop or two of DeoxIT Red or other contact cleaner put into the key opening followed by exercising the key a few dozen times may clear away the debris. You'll notice the key closure gradually improves with use if this is the case.

I believe other repair methods do require opening the case, but if opened carefully the case can be closed and not feel loose or rattle when handled. I've done repairs on Pioneer calculators and you'd have to check the rivits beneath the battery cover to know the case had been opened. There are several good articles about repairing Pioneers in the old article section (go to the Articles forum and check for a link to the old section in the introductory text at the top of the page).

Good luck bringing that old friend back!
~Mark

Remember kids, "In a democracy, you get the government you deserve."
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 42S - wobbly "+" key - reach - 09-17-2019, 04:50 PM
RE: HP 42S - wobbly "+" key - mfleming - 09-18-2019 01:13 AM



User(s) browsing this thread: 1 Guest(s)