Restoring/repairing/replacing classic series button contacts

[jipumarino]

(09-16-2019 06:15 AM)Bernd Grubert Wrote:  Hello,
I made the replacement at an HP 11c with metal domes, which I bought from AliExpress. There you will find metal domes with different diameter and force. I chose those with the lowest pressing force. They work well, although they still seem a little bit too stiff. Since they are not very expensive you might give them a try.

Regards
Bernd

Edit: I confused AliExpress with AliBaba.

Thank you! I’ll give that a try