Help needed with HP-IL disk drive
|
05-26-2014, 02:40 AM
(This post was last modified: 05-26-2014 02:48 AM by Katie Wasserman.)
Post: #9
|
|||
|
|||
RE: Help needed with HP-IL disk drive
(05-26-2014 01:48 AM)Namir Wrote: Can you recommend a power supply model that I can buy from Amazon or anywhere else on the Internet? There are many 2 amp variable DC power supplies around. But most low-end ones will make it too easy to change the voltage when you don't want it to change. This might make for a bad day if it accidentally gets cranked up too high. This one is regulated, has a 6 volt setting, and the voltage setting is not too easy to change. I have one and it's decent as long as you don't run it at full load (2 Amps) for too long. $32 is a lot of money for this, shop around and you'll be able to find it for a lot less. Look for MW122A it goes by many brand names. BTW, at 3 and 4.5 volts it's also good for powering HP handhelds. p.s. MCM has it on sale for under $18 (+ shipping and tax) This looks like the same thing too. -katie |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 3 Guest(s)