Search
Member List
Calendar
Help
HP Forums
/
HP Calculators (and very old HP Computers)
/
General Forum 
/
Another HP-97 printer repair
/
Another HP-97 printer repair
|
Another HP-97 printer repair
|
|
10-27-2019, 10:30 AM
(This post was last modified: 10-27-2019 02:52 PM by Moggul.)
Post: #1
|
|||
|
|||
|
Another HP-97 printer repair
I just finished repairing the printer in my HP-97.
As usual, the plastic idler wheel had disintegrated and had to be replaced. https://www.youtube.com/watch?v=qsv8N7GFpEg This is the replacement wheel from the German shop. The inner diameter is 2 mm which needs to be enlarged to 3/32" https://ghw-modellbau.de/product_info.ph...ts_id=3066 I enlarged the bore to 2,5 mm which is close enough to the actual 3/32" to fit the shaft. Luckily I ordered 3 wheels as I mistakenly bored the first one to 3 mm. The trickiest part was putting the circlip back in place. I had to source a few replacements from my local hardware shop as I managed to lose the original one. https://www.youtube.com/watch?v=DcVAF1Pc7GA Next project is rebuilding the card reader. Parts are already on their way. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Another HP-97 printer repair - Moggul - 10-27-2019 10:30 AM
RE: Another HP-97 printer repair - rprosperi - 10-27-2019, 01:11 PM
RE: Another HP-97 printer repair - Moggul - 10-27-2019, 02:56 PM
|
User(s) browsing this thread: 1 Guest(s)