Intro and 9133D HDD

[JvZ]

As you would've read above, I'm busy restoring three HP-150s.

Good news is that all 3 are working......but.....

Bad news is that, on 2 of them, the video boards are dead....the dreaded leaking-battery problem, I'm sure. Both had bad leakage. I cleaned them as much as possible and then they went into an ultrasonic bath to clean out all the corrosion under the chips, etc.

Still dead, unfortunately. So I'll try and find corroded tracks (nothing visual, so far) and see if I can bring them back to life.

Any case; my question;

Do we know;

1. Someone who can repair these boards down to component level? (I'm OK with component level repair, myself, but these boards are not easy to get to while switched on, I assume you need a special rig.)

2. A source for these boards? It's burns my butt-hole that I have two "working" systems that I can't put back into the collector community......happy to buy two working boards.