Post Reply 
Hp35 display problem. Opened without bending the sticker
05-01-2020, 04:47 PM
Post: #3
RE: Hp35 display problem. Opened without bending the sticker
(05-01-2020 03:11 PM)toml_12953 Wrote:  
(05-01-2020 01:30 PM)isanchez Wrote:  On the other hand, you get two small holes in the battery compartiment, but they are not visible at all and, if you want, they can be filled with black putty or black silicone.

As I said, I share some pictures of the process (and the dsiplay failure), available here: https://we.tl/t-HLQF1mHtCf

Ignacio

Very nice job! How do you put it back together again, though? Do you just leave out those two screws?

Hi,
I never screwed these two back in place (neither with the sticker method nor in this new approach, obviously in this case, because there is no way to do it) . If it is necessary to open it again, then you have to release the sticker, again, and this means more damage. I consider these two screws are not necessary at all to keep the calculator safely closed, at least from my experience.
Regards

Ignacio
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Hp35 display problem. Opened without bending the sticker - isanchez - 05-01-2020 04:47 PM



User(s) browsing this thread: 1 Guest(s)