Post Reply 
French assistance needed.
07-03-2020, 02:23 AM (This post was last modified: 07-04-2020 02:30 AM by Sylvain Cote.)
Post: #13
RE: French assistance needed.
The following procedure is for the driver installation only, read ClonixConfig.pdf for additional information.
  1. download the latest Clonix software at: www.clonix41.org/Projects/Updates/Clonix_CD_090315.zip
  2. unzip the file: Clonix_CD_090315.zip
  3. plug your Clonix/NoV programmer to your computer (Windows will automatically install the latest Prolific driver: 3.8.31.0 [2019-07-30])
  4. go to the Windows 7 driver sub-folder of your clonix folder => [CLONIX_FOLDER]\USB_Drivers\Win7\
  5. unzip the file: PL2303_Prolific_DriverInstaller_v1210.zip
  6. run the file: PL2303_Prolific_DriverInstaller_v1210.exe (this will install an older Prolific driver: 3.3.11.152 [2010-03-12])
    1. press the YES button to allow the program to run
    2. press the Next button to continue the installation
    3. press the Finish button to close the installation program
  7. In Type here to search space
    1. type: device manager
    2. You should see Device Manager in the above list
    3. click on it.
  8. in Device Manager
    1. click on Port (COM & LPT)
    2. double-click on PL2303HXA PHASED OUT DRIVER SINCE 2012. PLEASE CONTACT YOUR SUPPLIER to show driver properties dialog box
    3. in PL2303HXA PHASED OUT DRIVER SINCE 2012. PLEASE CONTACT YOUR SUPPLIER driver dialog box
      1. click on the Driver tab
      2. click on Update Driver button
      3. click on Browse my computer for drivers
      4. click on Let me pick from a list of available drivers on my computer
      5. select Prolific USB-to-Serial Comm Port Version 3.3.11.152 [2010-03-12] model
      6. click on Next button to activate the selected driver
      7. click on Close button to close the driver dialog box
    4. click on Close button to close the driver driver properties dialog box
    5. close the Device Manager dialog box
  9. reboot Windows 10
  10. In Type here to search space
    1. type: device manager
    2. You should see Device Manager in the above list
    3. click on it.
  11. in Device Manager
    1. click on Port (COM & LPT)
    2. write down the COM port number assigned to the Prolific USB-to-Serial Comm Port driver(COM?)
      you will need that information later on when you run MicroBurn software for the first time
    3. close the Device Manager dialog box
Diego, is this what you were looking for ?
If the above is ok, then I will post the French version tomorrow.

Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
French assistance needed. - Diego Diaz - 07-01-2020, 09:09 PM
RE: French assistance needed. - Archilog - 07-01-2020, 09:20 PM
RE: French assistance needed. - Diego Diaz - 07-01-2020, 11:35 PM
RE: French assistance needed. - grsbanks - 07-02-2020, 07:24 AM
RE: French assistance needed. - Diego Diaz - 07-02-2020, 12:55 PM
RE: French assistance needed. - rprosperi - 07-02-2020, 04:15 PM
RE: French assistance needed. - ijabbott - 07-02-2020, 04:28 PM
RE: French assistance needed. - Diego Diaz - 07-03-2020, 02:12 AM
RE: French assistance needed. - Sylvain Cote - 07-03-2020 02:23 AM
RE: French assistance needed. - Diego Diaz - 07-03-2020, 03:54 AM
RE: French assistance needed. - Diego Diaz - 07-03-2020, 08:15 PM
RE: French assistance needed. - JMBaillard - 07-05-2020, 03:58 PM
RE: French assistance needed. - JMBaillard - 07-06-2020, 03:32 PM



User(s) browsing this thread: 5 Guest(s)