The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 795 - File: showthread.php PHP 7.4.33 (FreeBSD)
File Line Function
/showthread.php 795 errorHandler->error




HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / [WP-34S] DEG and RAD - diffs

Post Reply 
[WP-34S] DEG and RAD - diffs
06-05-2014, 12:08 AM (This post was last modified: 06-05-2014 04:31 PM by pito.)
Post: #1
pito Offline
Member
 		Posts: 131
Joined: Jun 2014
[WP-34S] DEG and RAD - diffs
With WP34S emulator v3.3.3605 and 9degree test (double) you get with DEG mode
Code:
DEG mode
asin(acos(atan(tan(cos(sin(9.0))))))

8.999999999999999999999999999937535

with RAD mode:
Code:
RAD mode
180.0/pi * asin(acos(atan(tan(cos(sin(9.0 * pi/180.0))))))

8.999999999999999999999999999999979
Is that a feature or a bug?

PS: UPDATE: we do the conversions from 9deg->rad and rad->9deg with the RAD, of course.. (see above)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[WP-34S] DEG and RAD - diffs - pito - 06-05-2014 12:08 AM
RE: DEG and RAD - diffs - Paul Dale - 06-05-2014, 12:53 AM
RE: DEG and RAD - diffs - pito - 06-05-2014, 06:27 AM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 01:38 PM
RE: [WP-34S] DEG and RAD - diffs - Dieter - 06-05-2014, 11:12 AM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 06:04 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 07:57 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-05-2014, 10:07 PM
RE: [WP-34S] DEG and RAD - diffs - Dieter - 06-06-2014, 05:27 PM
RE: [WP-34S] DEG and RAD - diffs - pito - 06-07-2014, 12:57 PM



User(s) browsing this thread: 2 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication